Revision history of "File:30. Tighteneing Lower Ball Joint.JPG"

Jump to navigation Jump to search

Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

  • curprev 10:05, 18 June 2006‎ Andrew S talk contribs‎ 312 bytes +312‎ Step 28. With the suspension under compression tighten the lower ball joint nut to 45NM. If you only have a basic tool kit you will not be able to use a 19mm socket and torque wrench because the hub carrier will be in the way, so you will need to estimate
Retrieved from ‘https://wiki.seloc.org/a/File:30._Tighteneing_Lower_Ball_Joint.JPG’