Revision history of "File:8. Removing Lower Ball Joint Nut.JPG"

Jump to navigation Jump to search

Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

  • curprev 09:50, 18 June 2006‎ Andrew S talk contribs‎ 336 bytes +336‎ Step 7. Remove the ball joint nut . Use a 19mm ring/open ended spanner for the lower ball joint. You need to start with the ring end and transfer to the open end after winding the nut half the way up, otherwise the ring spanner will get stuck between the
Retrieved from ‘https://wiki.seloc.org/a/File:8._Removing_Lower_Ball_Joint_Nut.JPG’