Radiator
The standard OEM Elise radiator is another weak point in the cooling system. Although it is lightweight, it has plastic end tanks which are prone to expanding and leaking under pressure.
Unfortunately you need to Remove S2 front clamshell before you can replace the radiator.
A upgraded radiator is pretty advisable when going for Honda/Audi/Duratec engine upgrades. Most converted cars on the original radiators seem to blow them up pretty soon after conversion.
Leaks
The most common fault with the OEM radiator is cracking/spliting of the plastic end tanks. The first signs of failure are drops of coolent on the windscreen, either drivers or passengers side, but castrophic failure of the end tanks has been known.
Quite often the passenger side hose is poorly connected (because it is difficult to do) and sometimes the bleed screw can leak.
The OEM radiators seem to have a problem with their manufacture where the main core is bonded to the top/bottom and leaks are all too common.
Indication of HGF
Its been suggested in the past that a blown radiator can indicate imminent HGF. The header tank cap is normally the first to vent when the system is pressurised since it only requires approximately 1 bar. The radiator is designed to operate at pressures a lot higher than this and the cap acts as a fuse. However, the header tank is on the lowest pressure point of the circuit and this allows high pressure peaks on the high pressure side (which is from the engine to the rad). need more thought here
Aftermarket Upgrades
Replacement may require careful drilling out of the fan bracket rivets
PMA group
The original equipment manufacturer
Typically the plastic endcaps can be expected to be good for 3 years
http://www.pmagroup.co.uk/branches.php
At least one branch will sell for £100 + VAT inc 12months warranty You'll need to refit the fan brackets
Eliseparts
All aluminium upgraded radiator
All aluminium hi pressure radiator
Standard OEM radiator with plastic end tanks
Eliseparts offer three radiators, the standard OEM with plastic end tanks, an all aluminium alternative and a race radiator.
Proalloy
Pro Alloy direct replacement radiator
Pro Alloy, Run by SELOC member Wayne Clayden offer a direct replacement for the standard unit: -
- Twin row 45mm thick, high efficiency alloy core.
- Aluminium end tanks,(good for high pressure systems)
- All Pro Alloy radiator cores are fully brazed in a controlled atmosphere process to comply with ISO 9001 quality assurance standards
Elise-Shop.com
Original OE radiator with plastic end tanks
Full Aluminium High Pressure Radiator (Elise, Exige, 340R, VX220 - non VVTi)
Elise-Shop.com Run by SELOC member Yvo Tuk offer two radiators, the standard OEM with plastic end tanks and a Full aluminium alternative.
Have a read in this thread to learn more about the latest options available!
Charles Zügn
SELOC Member Yasec Sells a Alloy Radiator for 285 GBP incl. delivery. (This is for the 32mm thick version) and is the lightest on the market. see thread: http://arc.seloc.org/t/102391 There is also the motorsport vesion with 40mm thickness for 355 GBP incl. delivery. Custom fan brackets optional for 2 fans or for different fans like the oem available!