S1 headlight repair & replacement

1st park the car a known distance from a wall and mark where the lights fall on the wall so you can align them back up after...

Next...

Remove wheel, hold back or remove liner...

http://gallery.seloc.org/albums/userpics/13397/DSC00002.JPG

Remove light and tie cables out of the way. Remove that rusty thing, clean up inside of clam shell.

http://gallery.seloc.org/albums/userpics/13397/DSC00001.JPG

Bond in new bracket being carefull not to leave any adhesive showing, you may need to remove head light covers to help with this, then leave for a day to cure.

You may also want to replace the units if they are rusty and or put in some better bulbs

http://gallery.seloc.org/albums/userpics/13397/DSC00003.JPG