Difference between revisions of "Wheel bearings"

From TechWiki
Jump to navigation Jump to search
 
(4 intermediate revisions by 2 users not shown)
Line 10: Line 10:
 
===Elise S2 Non ABS===
 
===Elise S2 Non ABS===
  
The Rover S2 uses 3 identical bearing packs without built-in sensor and 1 pack with a sensor for the ECU (which then relays it to the speedo) on one of the rear wheels. These bearing packs originate from the Opel/Vauxhall Astra G front axle.
+
The Rover S2 uses 3 identical bearing packs without built-in sensor and 1 pack with a sensor for the ECU (which then relays it to the speedo) on one of the rear wheels.  
 +
 
 +
These bearing packs originate from the Opel/Vauxhall Astra G front axle.  
  
 
====OEM Lotus part numbers====
 
====OEM Lotus part numbers====
Line 27: Line 29:
  
 
* bearing packs
 
* bearing packs
* new mounting bolts (approx 10mm too long for the Elise can be cut down)
+
* new mounting bolts (approx 10mm too long for the Elise can be cut down - M12 x 40 Metric fine thread which are hard to find, best order Lotus OE A116W1170F)
 
* new castle nut for the driveshaft/CV
 
* new castle nut for the driveshaft/CV
 
* new split pin for castle nut
 
* new split pin for castle nut
Line 36: Line 38:
 
Use 4 identical bearing packs, ALL with speed pulse for the ABS signal (which in turn feeds that to the ECU)
 
Use 4 identical bearing packs, ALL with speed pulse for the ABS signal (which in turn feeds that to the ECU)
  
 
+
For part numbers see the 'with speed sensor' entries above.
  
 
[[Category:Lotus Elise]]
 
[[Category:Lotus Elise]]
 
[[Category:S1]]
 
[[Category:S1]]
 
[[Category:S2]]
 
[[Category:S2]]

Latest revision as of 20:18, 9 June 2011

Wheel Bearings

Please Add Info


Elise S1

Timken JRM3938A.

Elise S2 Non ABS

The Rover S2 uses 3 identical bearing packs without built-in sensor and 1 pack with a sensor for the ECU (which then relays it to the speedo) on one of the rear wheels.

These bearing packs originate from the Opel/Vauxhall Astra G front axle.

OEM Lotus part numbers

  • Bearing pack without built-in speed sensor: A117D6002F
  • Bearing pack with built-in speed sensor: A117D6005F

Replacment parts

Bearing units are originally made by SKF who also sell complete aftermarket replacement kits:

  • SKF VKBA3510 without sensor
  • SKF VKBA3511 with sensor

Both SKF kits come including:

  • bearing packs
  • new mounting bolts (approx 10mm too long for the Elise can be cut down - M12 x 40 Metric fine thread which are hard to find, best order Lotus OE A116W1170F)
  • new castle nut for the driveshaft/CV
  • new split pin for castle nut
  • dust cover for center

Elise S2 ABS

Use 4 identical bearing packs, ALL with speed pulse for the ABS signal (which in turn feeds that to the ECU)

For part numbers see the 'with speed sensor' entries above.