Difference between revisions of "Wheel bearings"
Jump to navigation
Jump to search
m |
|||
| Line 14: | Line 14: | ||
* Bearing pack without sensor: A117D6002F | * Bearing pack without sensor: A117D6002F | ||
* Bearing pack with sensor: A117D6005F | * Bearing pack with sensor: A117D6005F | ||
| + | |||
| + | Bearing units are made by SKF who also sell complete replacement kits: | ||
| + | |||
| + | * SKF VKBA3510 without sensor | ||
| + | * SKF VKBA3511 with sensor | ||
| + | |||
| + | Both kits come including: | ||
| + | |||
| + | * bearing packs | ||
| + | * new mounting bolts (approx 10mm too long for the Elise can be cut down) | ||
| + | * new castle nut for the driveshaft/CV | ||
| + | * new split pin for castle nut | ||
| + | * dust cover for center | ||
===Elise S2 ABS=== | ===Elise S2 ABS=== | ||
Revision as of 21:14, 1 May 2010
Wheel Bearings
Please Add Info
Elise S1
Timken JRM3938A.
Elise S2 Non ABS
The Rover S2 uses 3 identical bearing packs without sensor and 1 pack with a sensor for the ECU (which then relays it to the speedo) on one of the rear wheels.
- Bearing pack without sensor: A117D6002F
- Bearing pack with sensor: A117D6005F
Bearing units are made by SKF who also sell complete replacement kits:
- SKF VKBA3510 without sensor
- SKF VKBA3511 with sensor
Both kits come including:
- bearing packs
- new mounting bolts (approx 10mm too long for the Elise can be cut down)
- new castle nut for the driveshaft/CV
- new split pin for castle nut
- dust cover for center
Elise S2 ABS
Use 4 identical bearing packs, ALL with speed pulse for the ABS signal (which in turn feeds that to the ECU)