Search results

...has a fetish for superman t-shirts, unpowered racing, a bloke named Beak & circle-jerks.

White Point / White Circle

...break anything !) The picture below shows what to disconnect (lower green circle) ...he frame. The drivers side one is shown on the picture above (upper green circle), and the passenger one is found likewise.

...terhams and a bottle of champagne to the driver who could drift a complete circle for the longest time. ...to the inevitable spins, we were each successfully power sliding round the circle under control (mostly!).

# Once you've goth the fit right, pack the bearing space (red circle in 2nd diagram) with as much grease as you can squeeze in at both ends, sli

...eed to protect the roll bar with masking tape. Using the two inverted semi circle escutcheons on the windscreen frame as a guide place masking tape on the ro

5. Draw a 28mm diameter circle (or however big your power outlet diameter is) on a piece of paper and cut

...leeve over the threads so it looks nice and less abrasive on wiring, small circle of sound deadening on the head of the bottle so it doesn't rattle, spring w

...he timing marks, with everything lined up you should be able to see a semi-circle in the 6mm hole in the cam carrier like this

...) - Look in the passenger side of the boot and you'll find a black plastic circle. remove this and fiddle around inside until you can grab fuse. pliers are

| valign="top" | Turning circle

Medium torque pad developed specifically for road, rally and circle track racing<br> Designed for pavement circle track under 2800 lbs<br>