Search results
Jump to navigation
Jump to search
- Car just failed the MOT (French) on a badly split gaiter and reading some of the horror stories about skinned knu The result is that I've just swapped a gaiter in 20 minutes (not including jacking and taking the wheel off).2 KB (374 words) - 20:40, 2 April 2013
- '''D.I.Y. Black Wheels''' ...ing on doing an absolutely flawless job - in which case you would not be d.i.y.ing anyway (or if the tyres were already off)2 KB (386 words) - 14:16, 19 January 2012
- =Lotus Driving Academy - Level 1= ...er couldn‟t have been any more perfect, beautiful clear blue skies and not a chance of any rain.3 KB (555 words) - 19:58, 31 July 2011
- Exclusive ALIAS23 range of tuning, aero, and performance products for the Lotus Exige V6 S3 platform. Owner run and tested. ...s to meet demand from like minded owners. Fast forward to today and I have a growing product catalogue and ship globally. Thank you to everyone whose su676 bytes (111 words) - 12:23, 11 May 2020
- [[Image:Front splitter.jpg|thumb|left|Front splitter on a S2 Elise]] ...r protruding forwards into the airflow. Although this looks simple, it is a very efficient way to generate downforce at the front of the car.3 KB (448 words) - 11:02, 26 May 2012
- ...K Series S1 and S2 (Toyota I am unsure, citation needed) can sometimes be a problem, restricting gear selection. ...gear linkage, however I cannot comment on this as I have only changed for a full kit myself.1 KB (242 words) - 12:47, 6 November 2011
- ...K Series Lotus Elise S2 fitted with later Bergstrom HVAC systems (without A/C fitted) and 2 radiator fans. ...l) at 108C. Bouncing between 98 and 103 leaves a lot of heat to soak after a track session and the coolant really wants to be 85 before shutdown.3 KB (544 words) - 09:24, 17 July 2013
- =Driven: Lotus Elise 1.6= ...anning is always a good idea, and I thought I'd done enough — I knew where I had to be, when, and how long for.5 KB (919 words) - 22:40, 28 July 2011
- ...notorious for its poor radio reception. This is mainly due to the lack of a ground plane for the aerial, and the large amount of Radio Frequency Interf ...can help - the Wip from a Rover 25 is a direct replacement and only costs a few quid.4 KB (676 words) - 11:42, 3 November 2012
- The Alpine Ezi-DAB module is a small adaptor which can be used to retro-fit DAB radio support to cars with ...inserting a disc and eased my fingers behind the panel and pulled forward. A flat blade screwdriver between bottom of the panel and dash helps ease out2 KB (389 words) - 12:43, 10 September 2012
- Over a period of time the cable which keeps the front of your soft top roof attach Order the following part from your local Lotus Dealership : B116V0064H3 KB (617 words) - 16:11, 14 May 2022
- User "''Simon back in an S1''" noted that at speed a draught was coming in to his Evora S which would disappear when the recircu To solve this problem a panel can be installed over the opening, preventing air from being drawn in3 KB (444 words) - 17:37, 22 February 2013
- ==A== [[Image:jacking points side.jpg|thumb|left|Jacking Point A]]3 KB (500 words) - 14:14, 30 May 2013
- '''Buying a Lotus two eleven 2-11 Advise given to myself by Ads_green and other members''' ...th. You really don't get to put any power down untill you're travelling in a straight line and it doesn't inspire confidence.6 KB (1,112 words) - 15:34, 12 December 2011
- ...best part of an hour to get the necessary detail out of the forum search. I'll re-post here: ...ample tubing already attached. Ample to do the job. Some people have used a similar TVR part, but this costs £12 and your nearest TVR dealer is probab7 KB (1,229 words) - 14:53, 6 February 2012
- 4/ Using an 8mm socket on a socket driver (not wrench) undo the two bolts that are facing you - the nut 6/ Fit the new lamp to the bracket and do up (not too tight yet as you will want to adjust it later and tilt it down to help you line up the bolts when refi1 KB (194 words) - 13:35, 19 January 2012
- ...longer the bar/allen key you use, the more leverage you get, and you need a lot! 1. Using a 2.5mm allen key, remove the grub screw on the front side (the side closest2 KB (344 words) - 12:25, 21 October 2016
- ...EM motor from the S1 Heater Assy is no longer available (and was £160 from Lotus when it was), an alternative is to use the blower motor assy from an 1990's ...lly identical to that on the S1, bar the welded on mounting flanges are in a different place.4 KB (804 words) - 18:12, 1 April 2015
- A DPM is a topic that has been posted more than once on the forums. It stands for 'Dou ...to the forums locate stories or videos on the web that are of interest to Lotus drivers, but have been around for some time.4 KB (593 words) - 12:53, 20 October 2014
- == Get a new one == ...r in diameter than the stock item which stops the door rattling. You need a 17mm spanner for this job.2 KB (361 words) - 12:51, 19 March 2017