Search results
Jump to navigation
Jump to search
Page title matches
- ===S1 Elise Suspension Enhancement Kit=== In order that owners of S1 Elise might enjoy the benefits of suspension development on6 KB (1,002 words) - 13:55, 16 March 2018
- This page aims to cover the Evoras basic suspension arrangement, revisions made to it over the course of the models lifecycle, The Lotus Evora features double wishbone suspension all round, however unlike the Elise and Exige the Evoras wishbones are made9 KB (1,413 words) - 00:27, 23 December 2017
Page text matches
- The anti-roll bar reduces body roll to keep the suspension geometry, and ultimately the tire, parallel with the road. ...ars reduce body roll more, but too stiff a bar can deteriorate independent suspension performance, and ultimately cause an inside tire to lift off the ground dur877 bytes (141 words) - 15:49, 18 April 2007
- ...t you need helper springs to keep the main spring in check (seated) as the suspension extends completely. [[Category:Suspension]]701 bytes (110 words) - 00:57, 13 July 2012
- Suspension Suspension2 KB (271 words) - 23:19, 4 March 2011
- [[Category:Suspension]]421 bytes (51 words) - 20:40, 9 May 2023
- [[Category:Suspension]]504 bytes (82 words) - 12:54, 9 August 2006
- ...ad on the bolt, but it will also make the bolt relatively brittle. Within suspension parts, you would rather see bolts bend than sheer. 8.8 grade bolts have the ==S2 K-series front suspension==4 KB (659 words) - 15:56, 21 July 2022
- [[Category:Suspension]]1 KB (241 words) - 01:23, 18 March 2008
- ...ractical upgrades (e.g upgraded brakes, braided hoses, harnesses and bars, suspension, cams, PRRT, discs, wheels, tyres etc.) This is really not as bad as it sounds, you should be more concerned about a suspension refresh.4 KB (683 words) - 18:31, 4 May 2011
- ===S1 Elise Suspension Enhancement Kit=== In order that owners of S1 Elise might enjoy the benefits of suspension development on6 KB (1,002 words) - 13:55, 16 March 2018
- ...b-frame to be replaced in the event of an accident which damages the front suspension mounting points - a weakness of the Elise chassis.3 KB (418 words) - 21:53, 8 July 2021
- [[Category:Suspension]]2 KB (278 words) - 19:51, 16 May 2008
- [[Category:Suspension]]2 KB (308 words) - 11:59, 5 April 2009
- [[Category:Suspension]]2 KB (361 words) - 17:32, 16 January 2009
- ...e. Lower the jack supporting the car to it’s minimum position and jack the suspension to the measurement at step 1. This is to ensure the damper is in it’s cor Step 28. With the suspension under compression tighten the lower ball joint nut to 45NM (S1 55Nm). If yo8 KB (1,412 words) - 11:24, 7 June 2008
- ...e. Lower the jack supporting the car to it’s minimum position and jack the suspension to the measurement at step 1. This is to ensure the damper is in it’s cor Step 28. With the suspension under compression tighten the lower ball joint nut to 45NM. If you only hav8 KB (1,424 words) - 17:54, 17 January 2023
- * With the suspension under compression tighten the lower ball joint nut to 45NM. (Lotus service [[Category:Suspension]]5 KB (916 words) - 12:34, 30 May 2013
- [[Category:Suspension]]2 KB (374 words) - 20:40, 2 April 2013
- ...ust taking out the wishbone bolts and sliding the wishbones out. All other suspension and brake components can remain in place. Only the brake pipe clamps need t ...ed loosely. The bolts cannot be torque tightened at this stage because the suspension needs to be loaded and sitting at normal ride height otherwise the bushes w20 KB (3,478 words) - 10:50, 30 April 2012
- ...ars.com/gb/ownership/wheelsbrakes-suspension Lotus Cars - Wheels, Brakes & Suspension] page.2 KB (259 words) - 18:50, 11 April 2013
- The green arrow points to where I place axle stands - this means that the suspension and springs compress onto the bump stops and support the car.3 KB (500 words) - 14:14, 30 May 2013