Editing Fitting a head unit (section)

==Fitting the new head unit==

Make sure you get the cage the right way round, the lip should be on your side on the cage. Pop the cables through the cage and then gently push down as many of the cage tages down, this holds the cage in the car. I used a screw driver to do this, once your happy it is secure slide the new headunit in after connecting the ISO loom togeather.  Make sure not to snag the cables.

[[image:Headunit14.JPG|left|thumb|Cage tages]]
{{clr}}
[[image:Headunit15.JPG|left|thumb|Job done!]]
{{clr}}


[[Category:Electrical]]