Remove the wheels: Difference between revisions
Jump to navigation
Jump to search
m →Fitting |
m Added to Exige category. |
||
| (12 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{Infobox Timetools | time=30 mins | tools=[[Tool roll]], Jack, 17mm socket, Wheel brace/extension bar, Copper grease}} | |||
=== Removal === | === Removal === | ||
| Line 6: | Line 8: | ||
=== Fitting === | === Fitting === | ||
Refit the wheel, replace the 4 wheel bolts so they are hand tight then lower car to the ground and torque wheel bolts to 105NM (S2) 80-85NM (S1) | Refit the wheel, replace the 4 wheel bolts so they are hand tight then lower car to the ground and torque wheel bolts to | ||
105NM (S2) | |||
80-85NM (S1) | |||
Check that there is no side to side play by trying to rock the wheel at a quarter to three. | Check that there is no side to side play by trying to rock the wheel at a quarter to three. | ||
| Line 13: | Line 19: | ||
[[Image:36_Torque_Wheel_Bolts.JPG]] | [[Image:36_Torque_Wheel_Bolts.JPG|thumb|left]] | ||
{{clr}} | {{clr}} | ||
| Line 20: | Line 26: | ||
Do not over torque the nuts '''they will shear''' invest in a torque wrench or you will end up paying out for a new set of wheel bolts. | Do not over torque the nuts '''they will shear''' invest in a torque wrench or you will end up paying out for a new set of wheel bolts. | ||
[[Image:brokenbolt.JPG]] | [[Image:brokenbolt.JPG|thumb|left]] | ||
{{clr}} | {{clr}} | ||
[[Category:DIY]] | [[Category:DIY]] | ||
[[Category:Wheels and tyres]] | |||
[[Category:Lotus Elise]] | |||
[[Category:S1]] | |||
[[Category:S2]] | |||
[[Category:S2 Exige]] | |||
Latest revision as of 14:42, 30 May 2013
| Time & Tools | |
| Time: | 30 mins |
|---|---|
| Tools: | Tool roll, Jack, 17mm socket, Wheel brace/extension bar, Copper grease |
Removal
[edit | edit source]Loosen the 4 wheel bolts with bolt tools found in the Tool roll then jack up the car, then undo the wheel bolts and remove the wheel.
Fitting
[edit | edit source]Refit the wheel, replace the 4 wheel bolts so they are hand tight then lower car to the ground and torque wheel bolts to
105NM (S2)
80-85NM (S1)
Check that there is no side to side play by trying to rock the wheel at a quarter to three.
Depress brake pedal a few times to get the pressure back.
Warning
[edit | edit source]Do not over torque the nuts they will shear invest in a torque wrench or you will end up paying out for a new set of wheel bolts.
