Weight reduction: Difference between revisions

From TechWiki
Jump to navigation Jump to search
← Older edit
undoSTillett (talk | contribs)
4 edits
VisualWikitext
No edit summary
 
(64 intermediate revisions by 8 users not shown)
Line 3: Line 3:
{| border=1 cellpadding=5 cellspacing=2
{| border=1 cellpadding=5 cellspacing=2
|-
|-
| Original Weight (Kg) || Aftermarket product and weight (Kg)
| Original Weight (kg) || Aftermarket product and weight (kg)
|-
|-
| colspan=2 |
| colspan=2 |
=== Brakes ===
=== Brakes ===
|-
|-
| S1 MMC 8 Kg || EBC 6 Kg
| S1 MMC 2.9 kg/each || EBC 6 kg
|-
| || S1 Eliseparts Ali Bells 5.245kg/each
|-
| || S1 EBC (Grooved) 5.605kg/each
|-
| || S1 Pagid (plain) 5.790Kg/each
|-
|-
| S2 Drilled 9Kg || Ali bells 8.9Kg
| S2 Drilled 5.9 kg/each || Ali bells 5.0 kg
|-
|-
| colspan=2 |
| colspan=2 |
=== Exhaust ===
=== Exhaust ===
|-
|-
| S1 Standard 20Kg || S1 Elisepaerts Sport Exhaust 25Kg
| S1 Standard 20 kg || S1 Eliseparts Sport Exhaust 8 kg
|-
|  K series standard manifold 3.3kg flexi pipe 3.4kg || k series full stainless steel 4-1 manifold 8kg
|-
| S1 Standard Manifold 3.285kg, S1 Standard Flexi Pipe 3.425kg  || S1 Janspeed 4-2-1 small bore w/flexi 6.575kg
|-
|  || S1 Eliseparts 4" SCRP 2.335kg
|-
|  || S1 Eliseparts 5" SCRP 2.235kg
|-
|  || S1 Eliseparts 5" Sports Exhaust 7.985kg
|-
| colspan=2 |
 
=== Steering/Suspension ===
|-
| S1 Front Ball Joint Mount 332g/Each  || Eliseparts Aluminium Ball Joint Mount 122g/Each
|-
| S1 (Early) Steering Arm 368g/Each  ||
|-
| S1 (Later) Steering Arm ???g/Each || Eliseparts Lightweight Aluminium Steering Arm 300g/Each
|-
| colspan=2 |
 
=== Engine ===
|-
| S1 Rear Engine Mount 854g || S1 Eliseparts Adjustable Engine Mount 462g
|-
| S1 Magneti Marelli Alternator 5.075Kg || S1 Eliseparts Lightweight 'K' Series Alternator (steel pulley) 3.230Kg
|-
| colspan=2 |
 
=== Interior ===
|-
| S1 Standard Leather Seats, without Sub-frame 6.170Kg/Each || Probax Motorsport (Harness Hole) Seats, without Sub-frame 7.355Kg/Each
|-
| B5 Tillett seat with panels without brackets 5.5kg /Each || B7 Tillett FIA approved seat with head pad, without brackets 3.7kg/Each
|-
| colspan=2 |
 
=== Wheels ===
|-
| S1 Standard Steel Wheel Nuts ~42g/Each (x16/ 704g) || Eliseparts Lightweight Wheel Nuts ~22g/Each (x16/ 374g)
|-
|  ||
|-
| colspan=2 |
 
=== Door ===
|-
| S2 w/o ali beam complete: 15.1kg || 
|-
|-
| S2 window mech.: 1.375kg ||
|-
| S2 window winder: 120g ||
|- 
| S2 mirror fixing triangle: 355g ||
|- 
| S2 mirror: 405g ||
|- 
| S2 seal window: 302g ||
|- 
| S2 inner trim (plastic+leather): 705g ||
|-
| S1 Door beam (inc hinge) : 4450g || S1 Door beam (modified, centre machined out) : 2850g
|-
|}
|}


Line 23: Line 97:




Carbon clams are hideous money compared to the weight saved, and dont save much at all unless they are auto claved or vacuum formed. Benetec CF Front Clam 4,95kg Vs std at 15kg but 58k:(
'''Carbon clams''' are hideous money compared to the weight saved, and don't save much at all unless they are autoclaved or vacuum formed. Benetec CF Front Clam 4.95 kg Vs std at 15 kg but cost £58k :( Benetec CF Rear Clam 7,2kg




Be very wary of poly side screens. They are very flexible and with the roof fitted flare out dramatically at speeds above 60MPH.
Be very wary of '''polycarbonate side screens'''. They are very flexible and, with the roof fitted, flare out dramatically at speeds above 60MPH.


Early rear arch liners are 2.8kg. Later liners are lighter.
Early '''rear arch liners''' are 2.8 kg. Later liners are lighter.




Removing the GRP where the reversing light and fog lights are, along with the grilles and the reversing light saves about 1kg.
Removing the GRP where the reversing light and fog lights are, along with the grilles and the reversing light saves about 1 kg.




The rubber seals around all four wheel arch liners (assuming you haven't ditched the arch liners) are about 200g each, and most of the boot lid seal can be removed with just token parts left in to prevent rattle giving about 1kg of saving.
The '''rubber seals around all four wheel arch liners''' (assuming you haven't ditched the arch liners) are about 200g each, and most of the boot lid seal can be removed with just token parts left in to prevent rattle giving about 1  kg of saving.






Exhaust Exige/111R Catback: 13kg. Stage 1 11.8Kg(saves 1.2KG), Stage 2 8,2Kg(saves 4.8KG), , Quicksilver Titanium 5,2KG(saves 7,8KG)
'''Exhaust''' Exige/111R Catback: 13 kg. Stage 1: 11.8 kg (saves 1.2 kg). Stage 2: 8.2 kg (saves 4.8 kg). Quicksilver Titanium: 5.2 kg (saves 7.8 kg)






S1 Weight Reduction  
'''S1 Weight Reduction'''




-13,4 kg Carbon fibre track seats (1,8 kg vs 8.5 kg) x2


-12,5kg Titanium Exhaust system(std 16kg Vs 3.5Kg)


-12.5 kg Titanium Exhaust system (std 16 kg vs 3.5 kg)


-12,2Kg Carbon fibre track seats (2,4kg vs 8.5 kg) x2


-11.2 kg MMC discs instead of iron disks (2.7 kg vs 5.5 kg each)


-11,2kg MMC discs instead of Iron disks (2,7Kg vs 5,5Kg each)


-11,1 KG TRM FSL001 instead of std AWI 5 spoke Wheels (20,7kg vs 31.8 kg)


-8.65kg Race battery (2.7 vs 11.35)


-9,9kg Race battery (www.voltphreaks.com or www.braillebattery.com) (1,36 kg vs 11.35 kg)


-7,25Kg Lexan front window (5kg vs 12,25kg)


-9.25kg 1/2 size alloy fuel tank


-6,8Kg Speedline Magnesium instead of std AWI 5 spoke (25kg vs 31,8kg)


-7.25 kg Lexan front window (5 kg vs 12.25 kg)


-6.55K Alloy Fuel Tank


-6.8 kg Speedline Magnesium instead of std AWI 5 spoke (25 kg vs 31.8 kg)


-4.4kg Carbon fibre fixed seat frames(2kg and 3kg vs 0,3KG)


-6.55 kg Alloy Fuel Tank


-4.4kg Remove the door reinforcement on 2 doors


-4.4 kg Carbon fibre fixed seat frames(2 kg and 3 kg vs 0.3 kg)


-4kg Remove Radio And speakers (Radio ~1,4Kg speakers ~1,6Kg)


-4.4 kg Remove the door reinforcement on 2 doors


-4kg Elispart solid 4-2-1 manifold 6kg std 10kg


-4 kg Remove radio and speakers (radio ~1.4 kg speakers ~1.6 kg)


-3,695Kg Soft top and mountings (Top 1,807kg, Siderails 1,888kg)


-3.695 kg Soft top and mountings (Top 1.807 kg, siderails 1.888 kg)


-3,3Kg Lightweight Flywheel


-3.3 kg Lightweight Flywheel


-2,71Kg Cat Replacement Pipe(flexi stainless) (1,587Kg Vs 4,3Kg)Mild Steel 1,8kg


-2.71 kg Cat Replacement Pipe (flexi stainless) (1.587 kg Vs 4.3 kg) mild steel 1.8 kg


-2.55Kg Lightweight alternator (3.35 kg vs 5.9kg)


-2.55 kg Lightweight alternator (3.35 kg vs 5.9 kg)


-2,2Kg Billet Aluminium Crankshaft pulley


-2.2 kg Billet aluminium crankshaft pulley


-2,136kg Back window


-2.136 kg Back window


-2kg Alu boot lit instead of GRP(Glass Reinforced Plastics)


-2 kg Alu top engine mount


-2Kg Alu top engine mount


-2 kg 2x Leather sill covers


-1.994Kg Rollbarcover


-1.994 kg Rollbar cover


-1,697kg Heat shield baggage compartment


-1.697 kg Heat shield baggage compartment


-1.388kg Dressed baggage compartment


-1,59 kg CF undertray insted of alu std


-1kg Leather sill covers


-1.388 kg Dressed baggage compartment


-1Kg Carbon fibre steering wheel (1.7kg vs 0.7kg)


-1.329Kg Original Airbox and filter


-0,872kg Alu Ball joint mounts (1,308kg vs 0,436kg)


-1 kg Eliseparts Lightweight Wheel studs


-0,8Kg Footwell divider


-1 kg Carbon fibre steering wheel (1.7 kg vs 0.7 kg)


-0,6kg Handbrake and gear stick cover


-0,9 kg Elisparts solid 4-2-1 manifold (5,8 kg vs std 6,7 kg)


-0.55kg Passenger footrest


-0,9 kg Carbon fibre side mirrors instead of std


-0,5kg Front Mud flaps


-0.872 kg Alu ball joint mounts (1.308 kg vs 0.436 kg)


-0,4kg Alarm siren


-0.8 kg Footwell divider


-0.23kg Inner Rear view mirror  
 
-0,83 kg lexan back window instead of std glass
 
 
-0.6 kg Handbrake and gear stick cover
 
 
-0.562 kg Pair of Alu Verniers instead of std iron pulleys(570g v.s. 298g each)
 
 
-0.53 kg Passenger footrest
 
 
-0.5 kg Front Mud flaps
 
 
-0.4 kg Alarm siren
 
 
-0.23 kg Inner Rear view mirror  




Line 142: Line 236:




-2/3 of std Polycarbonate/perspex rearscreen/sidescreens/frontscreen
-2/3 of std Polycarbonate / perspex rear/side/front screen
 
plastic boot lid stay 865g
 
2 x plastic floor mats 160g
 
passenger foot rest 535g
 
charcoal canister and pipes 625g
 
rear grills 310g
 
removal of fibre glass behind fog/reverse lights 370g
 
speakers including wiring 1220g
 
plastic speaker mounts behind seats 525g
 
plastic wiper motor guard 60g
 
rear wheel arch liners 2300g
 
plastic booy drain pipe 225g
 
front brake disc splash guards 210g
 
radio and surround 1760g
 
front grill 275g
 
handbrake trim surround 240g
 
Aerial and lead 160g


gear stick surround trim 325g


-?kg Elispart solid 4-2-1 manifold 6kg std?kg
alarm siren 370g


rubber trim from rear wheel arches and boot lid 140g


===Other Sorces of Information===
interior side pads 2000g


[http://forums.seloc.org/member.php?action=viewpro&member=SteveB  SteveB]
boot bag 1435g
 
heat insulation/sound deadening in boot 1495g
 
boot divider Ali 1295g
 
rear under tray (homemade Carbon fibre) reduced by 900g
 
Rear boot tray 1620g
 
heat shield above exhaust (below boot tray) 1885g
 
misc nuts bolts cables ties etc 445g
 
passenger seat & belt 9725g
 
remove cat and replace with CRP 2725g
 
battery replaced by varley red top 6100g
 
battery bracket and breather piper 200g
 
S1 fibreglass engine cover inc grills 4550g
 
S1 Aluminium engine cover inc grills 4155g (395g saving)
 
 
===Other sources of Information===
 
[http://forums.seloc.org/m/SteveB  SteveB]


http://www.340r.net/technical/weight/weight.htm
http://www.340r.net/technical/weight/weight.htm


http://forums.seloc.org/viewthread.php?tid=91178
http://forums.seloc.org/t/91178


http://www.elisetalk.com/forums/showthread.php?t=27701
http://www.elisetalk.com/forums/showthread.php?t=27701


[http://www.eliseparts.com/shop/index.php?main_page=index&cPath=128 Elise Parts Weight Reduction Section]
[http://www.eliseparts.com/shop/index.php?main_page=index&cPath=128 Eliseparts Weight Reduction Section]
 
 
[[Category:Lotus Elise]]
[[Category:S1]]
[[Category:S2]]

Latest revision as of 22:05, 30 August 2019


Original Weight (kg) Aftermarket product and weight (kg)

Brakes

[edit | edit source]
S1 MMC 2.9 kg/each EBC 6 kg
S1 Eliseparts Ali Bells 5.245kg/each
S1 EBC (Grooved) 5.605kg/each
S1 Pagid (plain) 5.790Kg/each
S2 Drilled 5.9 kg/each Ali bells 5.0 kg

Exhaust

[edit | edit source]
S1 Standard 20 kg S1 Eliseparts Sport Exhaust 8 kg
K series standard manifold 3.3kg flexi pipe 3.4kg k series full stainless steel 4-1 manifold 8kg
S1 Standard Manifold 3.285kg, S1 Standard Flexi Pipe 3.425kg S1 Janspeed 4-2-1 small bore w/flexi 6.575kg
S1 Eliseparts 4" SCRP 2.335kg
S1 Eliseparts 5" SCRP 2.235kg
S1 Eliseparts 5" Sports Exhaust 7.985kg

Steering/Suspension

[edit | edit source]
S1 Front Ball Joint Mount 332g/Each Eliseparts Aluminium Ball Joint Mount 122g/Each
S1 (Early) Steering Arm 368g/Each
S1 (Later) Steering Arm ???g/Each Eliseparts Lightweight Aluminium Steering Arm 300g/Each

Engine

[edit | edit source]
S1 Rear Engine Mount 854g S1 Eliseparts Adjustable Engine Mount 462g
S1 Magneti Marelli Alternator 5.075Kg S1 Eliseparts Lightweight 'K' Series Alternator (steel pulley) 3.230Kg

Interior

[edit | edit source]
S1 Standard Leather Seats, without Sub-frame 6.170Kg/Each Probax Motorsport (Harness Hole) Seats, without Sub-frame 7.355Kg/Each
B5 Tillett seat with panels without brackets 5.5kg /Each B7 Tillett FIA approved seat with head pad, without brackets 3.7kg/Each

Wheels

[edit | edit source]
S1 Standard Steel Wheel Nuts ~42g/Each (x16/ 704g) Eliseparts Lightweight Wheel Nuts ~22g/Each (x16/ 374g)

Door

[edit | edit source]
S2 w/o ali beam complete: 15.1kg
S2 window mech.: 1.375kg
S2 window winder: 120g
S2 mirror fixing triangle: 355g
S2 mirror: 405g
S2 seal window: 302g
S2 inner trim (plastic+leather): 705g
S1 Door beam (inc hinge) : 4450g S1 Door beam (modified, centre machined out) : 2850g

Elise Weight Reduction

[edit | edit source]

S1 Alarm Fob 20 grams


Carbon clams are hideous money compared to the weight saved, and don't save much at all unless they are autoclaved or vacuum formed. Benetec CF Front Clam 4.95 kg Vs std at 15 kg but cost £58k :( Benetec CF Rear Clam 7,2kg


Be very wary of polycarbonate side screens. They are very flexible and, with the roof fitted, flare out dramatically at speeds above 60MPH.

Early rear arch liners are 2.8 kg. Later liners are lighter.


Removing the GRP where the reversing light and fog lights are, along with the grilles and the reversing light saves about 1 kg.


The rubber seals around all four wheel arch liners (assuming you haven't ditched the arch liners) are about 200g each, and most of the boot lid seal can be removed with just token parts left in to prevent rattle giving about 1 kg of saving.


Exhaust Exige/111R Catback: 13 kg. Stage 1: 11.8 kg (saves 1.2 kg). Stage 2: 8.2 kg (saves 4.8 kg). Quicksilver Titanium: 5.2 kg (saves 7.8 kg)


S1 Weight Reduction


-13,4 kg Carbon fibre track seats (1,8 kg vs 8.5 kg) x2


-12.5 kg Titanium Exhaust system (std 16 kg vs 3.5 kg)


-11.2 kg MMC discs instead of iron disks (2.7 kg vs 5.5 kg each)


-11,1 KG TRM FSL001 instead of std AWI 5 spoke Wheels (20,7kg vs 31.8 kg)


-9,9kg Race battery (www.voltphreaks.com or www.braillebattery.com) (1,36 kg vs 11.35 kg)


-9.25kg 1/2 size alloy fuel tank


-7.25 kg Lexan front window (5 kg vs 12.25 kg)


-6.8 kg Speedline Magnesium instead of std AWI 5 spoke (25 kg vs 31.8 kg)


-6.55 kg Alloy Fuel Tank


-4.4 kg Carbon fibre fixed seat frames(2 kg and 3 kg vs 0.3 kg)


-4.4 kg Remove the door reinforcement on 2 doors


-4 kg Remove radio and speakers (radio ~1.4 kg speakers ~1.6 kg)


-3.695 kg Soft top and mountings (Top 1.807 kg, siderails 1.888 kg)


-3.3 kg Lightweight Flywheel


-2.71 kg Cat Replacement Pipe (flexi stainless) (1.587 kg Vs 4.3 kg) mild steel 1.8 kg


-2.55 kg Lightweight alternator (3.35 kg vs 5.9 kg)


-2.2 kg Billet aluminium crankshaft pulley


-2.136 kg Back window


-2 kg Alu top engine mount


-2 kg 2x Leather sill covers


-1.994 kg Rollbar cover


-1.697 kg Heat shield baggage compartment


-1,59 kg CF undertray insted of alu std


-1.388 kg Dressed baggage compartment


-1.329Kg Original Airbox and filter


-1 kg Eliseparts Lightweight Wheel studs


-1 kg Carbon fibre steering wheel (1.7 kg vs 0.7 kg)


-0,9 kg Elisparts solid 4-2-1 manifold (5,8 kg vs std 6,7 kg)


-0,9 kg Carbon fibre side mirrors instead of std


-0.872 kg Alu ball joint mounts (1.308 kg vs 0.436 kg)


-0.8 kg Footwell divider


-0,83 kg lexan back window instead of std glass


-0.6 kg Handbrake and gear stick cover


-0.562 kg Pair of Alu Verniers instead of std iron pulleys(570g v.s. 298g each)


-0.53 kg Passenger footrest


-0.5 kg Front Mud flaps


-0.4 kg Alarm siren


-0.23 kg Inner Rear view mirror


-1/2 of std Lightweight Starter Motor


-2/3 of std Polycarbonate / perspex rear/side/front screen

plastic boot lid stay 865g

2 x plastic floor mats 160g

passenger foot rest 535g

charcoal canister and pipes 625g

rear grills 310g

removal of fibre glass behind fog/reverse lights 370g

speakers including wiring 1220g

plastic speaker mounts behind seats 525g

plastic wiper motor guard 60g

rear wheel arch liners 2300g

plastic booy drain pipe 225g

front brake disc splash guards 210g

radio and surround 1760g

front grill 275g

handbrake trim surround 240g

Aerial and lead 160g

gear stick surround trim 325g

alarm siren 370g

rubber trim from rear wheel arches and boot lid 140g

interior side pads 2000g

boot bag 1435g

heat insulation/sound deadening in boot 1495g

boot divider Ali 1295g

rear under tray (homemade Carbon fibre) reduced by 900g

Rear boot tray 1620g

heat shield above exhaust (below boot tray) 1885g

misc nuts bolts cables ties etc 445g

passenger seat & belt 9725g

remove cat and replace with CRP 2725g

battery replaced by varley red top 6100g

battery bracket and breather piper 200g

S1 fibreglass engine cover inc grills 4550g

S1 Aluminium engine cover inc grills 4155g (395g saving)


Other sources of Information

[edit | edit source]

SteveB

http://www.340r.net/technical/weight/weight.htm

http://forums.seloc.org/t/91178

http://www.elisetalk.com/forums/showthread.php?t=27701

Eliseparts Weight Reduction Section

Retrieved from "https://wiki.seloc.org/index.php?title=Weight_reduction&oldid=12833"