Difference between revisions of "Weight reduction"

From TechWiki
Jump to navigation Jump to search
m
Line 10: Line 10:
 
| S1 MMC 2.9 kg/each || EBC 6 kg
 
| S1 MMC 2.9 kg/each || EBC 6 kg
 
|-
 
|-
| S2 Drilled 5.9 kg/each || Ali bells 8.9 kg
+
| S2 Drilled 5.9 kg/each || Ali bells 5.0 kg
 
|-
 
|-
 
| colspan=2 |
 
| colspan=2 |

Revision as of 10:10, 30 April 2008


Original Weight (kg) Aftermarket product and weight (kg)

Brakes

S1 MMC 2.9 kg/each EBC 6 kg
S2 Drilled 5.9 kg/each Ali bells 5.0 kg

Exhaust

S1 Standard 20 kg S1 Eliseparts Sport Exhaust 8 kg
K series standard manifold 3.3kg flexi pipe 3.4kg k series full stainless steel 4-1 manifold 8kg

Door

S2 w/o ali beam complete: 15.1kg
S2 window mech.: 1.375kg
S2 window winder: 120g
S2 mirror fixing triangle: 355g
S2 mirror: 405g
S2 seal window: 302g
S2 inner trim (plastic+leather): 705g

Elise Weight Reduction

S1 Alarm Fob 20 grams


Carbon clams are hideous money compared to the weight saved, and don't save much at all unless they are autoclaved or vacuum formed. Benetec CF Front Clam 4.95 kg Vs std at 15 kg but cost £58k :( Benetec CF Rear Clam 7,2kg


Be very wary of polycarbonate side screens. They are very flexible and, with the roof fitted, flare out dramatically at speeds above 60MPH.

Early rear arch liners are 2.8 kg. Later liners are lighter.


Removing the GRP where the reversing light and fog lights are, along with the grilles and the reversing light saves about 1 kg.


The rubber seals around all four wheel arch liners (assuming you haven't ditched the arch liners) are about 200g each, and most of the boot lid seal can be removed with just token parts left in to prevent rattle giving about 1 kg of saving.


Exhaust Exige/111R Catback: 13 kg. Stage 1: 11.8 kg (saves 1.2 kg). Stage 2: 8.2 kg (saves 4.8 kg). Quicksilver Titanium: 5.2 kg (saves 7.8 kg)


S1 Weight Reduction

-12.5 kg Titanium Exhaust system (std 16 kg vs 3.5 kg)


-12.2 kg Carbon fibre track seats (2.4 kg vs 8.5 kg) x2


-11.2 kg MMC discs instead of iron disks (2.7 kg vs 5.5 kg each)


-11,1 KG TRM FSL001 instead of std AWI 5 spoke Wheels (20,7kg vs 31.8 kg)


-9,9kg Race battery www.voltphreaks.com (1,36 kg vs 11.35 kg)


-7.25 kg Lexan front window (5 kg vs 12.25 kg)


-6.8 kg Speedline Magnesium instead of std AWI 5 spoke (25 kg vs 31.8 kg)


-6.55 kg Alloy Fuel Tank


-4.4 kg Carbon fibre fixed seat frames(2 kg and 3 kg vs 0.3 kg)


-4.4 kg Remove the door reinforcement on 2 doors


-4 kg Remove radio and speakers (radio ~1.4 kg speakers ~1.6 kg)


-3.695 kg Soft top and mountings (Top 1.807 kg, siderails 1.888 kg)


-3.3 kg Lightweight Flywheel


-2.71 kg Cat Replacement Pipe (flexi stainless) (1.587 kg Vs 4.3 kg) mild steel 1.8 kg


-2.55 kg Lightweight alternator (3.35 kg vs 5.9 kg)


-2.2 kg Billet aluminium crankshaft pulley


-2.136 kg Back window


-2 kg Alu boot lit instead of GRP (Glass Reinforced Plastic)


-2 kg Alu top engine mount


-1.994 kg Rollbar cover


-1.697 kg Heat shield baggage compartment


-1.388 kg Dressed baggage compartment


-1 kg Leather sill covers


-1 kg Carbon fibre steering wheel (1.7 kg vs 0.7 kg)


-0,9 kg Elisparts solid 4-2-1 manifold (5,8 kg vs std 6,7 kg)


-0.872 kg Alu ball joint mounts (1.308 kg vs 0.436 kg)


-0.8 kg Footwell divider


-0.6 kg Handbrake and gear stick cover


-0.53 kg Passenger footrest


-0.5 kg Front Mud flaps


-0.4 kg Alarm siren


-0.23 kg Inner Rear view mirror


-1/2 of std Lightweight Starter Motor


-2/3 of std Polycarbonate / perspex rear/side/front screen


Other sources of Information

SteveB

http://www.340r.net/technical/weight/weight.htm

http://forums.seloc.org/t/91178

http://www.elisetalk.com/forums/showthread.php?t=27701

Eliseparts Weight Reduction Section