Difference between revisions of "Wheel bearings"
Jump to navigation
Jump to search
Hbaumhardt (talk | contribs) |
|||
| (11 intermediate revisions by 3 users not shown) | |||
| Line 10: | Line 10: | ||
===Elise S2 Non ABS=== | ===Elise S2 Non ABS=== | ||
| − | The Rover S2 uses 3 identical bearing packs without sensor and 1 pack with a sensor for the ECU (which then relays it to the speedo) on one of the rear wheels. | + | The Rover S2 uses 3 identical bearing packs without built-in sensor and 1 pack with a sensor for the ECU (which then relays it to the speedo) on one of the rear wheels. |
| − | Bearing pack without sensor: A117D6002F | + | These bearing packs originate from the Opel/Vauxhall Astra G front axle. |
| − | Bearing pack with sensor: A117D6005F | + | |
| + | ====OEM Lotus part numbers==== | ||
| + | |||
| + | * Bearing pack without built-in speed sensor: A117D6002F | ||
| + | * Bearing pack with built-in speed sensor: A117D6005F | ||
| + | |||
| + | ====Replacment parts==== | ||
| + | |||
| + | Bearing units are originally made by SKF who also sell complete aftermarket replacement kits: | ||
| + | |||
| + | * SKF VKBA3510 without sensor | ||
| + | * SKF VKBA3511 with sensor | ||
| + | |||
| + | Both SKF kits come including: | ||
| + | |||
| + | * bearing packs | ||
| + | * new mounting bolts (approx 10mm too long for the Elise can be cut down - M12 x 40 Metric fine thread which are hard to find, best order Lotus OE A116W1170F) | ||
| + | * new castle nut for the driveshaft/CV | ||
| + | * new split pin for castle nut | ||
| + | * dust cover for center | ||
===Elise S2 ABS=== | ===Elise S2 ABS=== | ||
Use 4 identical bearing packs, ALL with speed pulse for the ABS signal (which in turn feeds that to the ECU) | Use 4 identical bearing packs, ALL with speed pulse for the ABS signal (which in turn feeds that to the ECU) | ||
| + | |||
| + | For part numbers see the 'with speed sensor' entries above. | ||
| + | |||
| + | [[Category:Lotus Elise]] | ||
| + | [[Category:S1]] | ||
| + | [[Category:S2]] | ||
Latest revision as of 19:18, 9 June 2011
Wheel Bearings
Please Add Info
Elise S1
Timken JRM3938A.
Elise S2 Non ABS
The Rover S2 uses 3 identical bearing packs without built-in sensor and 1 pack with a sensor for the ECU (which then relays it to the speedo) on one of the rear wheels.
These bearing packs originate from the Opel/Vauxhall Astra G front axle.
OEM Lotus part numbers
- Bearing pack without built-in speed sensor: A117D6002F
- Bearing pack with built-in speed sensor: A117D6005F
Replacment parts
Bearing units are originally made by SKF who also sell complete aftermarket replacement kits:
- SKF VKBA3510 without sensor
- SKF VKBA3511 with sensor
Both SKF kits come including:
- bearing packs
- new mounting bolts (approx 10mm too long for the Elise can be cut down - M12 x 40 Metric fine thread which are hard to find, best order Lotus OE A116W1170F)
- new castle nut for the driveshaft/CV
- new split pin for castle nut
- dust cover for center
Elise S2 ABS
Use 4 identical bearing packs, ALL with speed pulse for the ABS signal (which in turn feeds that to the ECU)
For part numbers see the 'with speed sensor' entries above.