Difference between revisions of "Rover PG1 gearbox"

From TechWiki
Jump to navigation Jump to search
(A copy of the "Gear Box's" article.)
 
 
(68 intermediate revisions by 16 users not shown)
Line 1: Line 1:
Various Gearboxes have been used in the Lotus Elise and often they are not possible to identify from the exterior as the housing appears the same.
+
[[Image:pg1.jpg|thumb|right]]
 +
The Rover PG1 gearbox fitted to the K series Elise, was manufactured by [[Powertrain Limited]] (who have now ceased trading), is a five-speed constant mesh gearbox, which employs helical gears for speed transmission and final drive. The transmission castings are full aluminium construction and all other components optimised for improved weight (36kg dry). The gearbox can be supplied with either a standard open differential or a Limited Slip Differential, presently Torsen.
  
This said there should be a serial number on the unit, if this can be located they can be identified by this number as follows
+
Due to the modular design of the gearbox various final drive ratio and 1st to 5th gear ratio combinations have been used. Including both present and past an overall total of 21 ratio combinations, 5 speedometer gear ratios; and 7 clutch levers designs for both hydraulic and cable operation can be called on to ensure the customers requirements are met.
  
GEARBOX SERIAL NUMBERS:
+
== Gearbox type ==
 +
[[Image:pg1_serial_number.png|thumb|left|Series number location on the bell housing]]
 +
Identification is via the serial number on the bell housing housing;
  
C6BP... - Standard box for Elise Mk1 and MGF  
+
=== Gearbox Application Table ===
 +
{| border=1 cellpadding=5 cellspacing=0
 +
! Gearbox Code !! 1 !! 2 !! 3 !! 4 !! 5 !! Final Drive !! Used In
 +
|-
 +
| G6BP  || 3.250 || 1.895 || 1.308 || 1.033 || 0.848 || 3.938 || S2 111S (WR "long" box)
 +
|-
 +
| C4BP  || 3.167 || 1.842 || 1.308 || 1.033 || 0.765 || 4.200 || MGF VVC/Trophy (as standard but final drive 4.2)
 +
|-
 +
| C6BP || 3.167 || 1.842 || 1.308 || 1.033 || 0.765 || 3.938 || Elise S1 standard and MGF
 +
|-
 +
| B4BP  || 2.923 || 1.750 || 1.308 || 1.033 || 0.848 || 4.200 || S1 111S & S1 Sports 135 & S2 135R & S2 standard (CR Box)
 +
|-
 +
| NA || 3.167 || 1.842 || 1.308 || 1.033 || 0.848 || 4.200 || Elise-spares
 +
|-
 +
| B4BPU || 2.923 || 1.750 || 1.308 || 1.033 || 0.848 || 4.200 || Exige S1 uprated (CR Box)
 +
|-
 +
| B4BPQ || 2.923 || 1.750 || 1.308 || 1.033 || 0.848 || 4.200 || Exige S1 with LSD (CR Box)
 +
|-
 +
| B6BST || 2.923 || 1.750 || 1.308 || 1.033 || 0.848 || 3.938 || Rover "BRM" 200 - CR box with std final drive & torsen LSD
 +
|-
 +
| 340R UCR || 3.000 || 1.937 || 1.556 || 1.273 || 1.043 || 3.920 || 340R LOTAC05255 Conversion
 +
|-
 +
| NA    || 3.167 || 1.842 || 1.410 || 1.100 || 0.909 || 3.938 || Eliseparts
 +
|-
 +
| G4BSV || 3.250 || 1.894 || 1.307 || 1.033 || 0.848 || 4.200 || MG ZR 160 VVC
 +
|-
 +
| M4BSQ || 2.923 || 1.894 || 1.500 || 1.269 || 1.034 || 4.200 || MG ZR Motorsport Vehicles
 +
|}
  
C4BP... - MGF VVC box (as standard but final drive 4.2)
+
=== Gearbox Codes ===
 +
The first letter is the gearset
  
B4BP... - Lotus CR box, Elise Mk1 111s + Elise Mk2 standard box
+
{| border=1 cellspacing=0 cellpadding=5
 +
! Letter !! 1 !! 2 !! 3 !! 4 !! 5
 +
|-
 +
| B || 2.923 (13/38)|| 1.750 (20/35)|| 1.308 (26/34)|| 1.033 (30/31)|| 0.848 (33/28)
 +
|-
 +
| C || 3.167 (12/38)|| 1.842 (19/35)|| 1.308 (26/34)|| 1.033 (30/31)|| 0.765 (34/26)
 +
|-
 +
| G || 3.250 (12/39)|| 1.895 (19/36)|| 1.308 (26/34)|| 1.033 (30/31)|| 0.848 (33/28)
 +
|-
 +
| K || 2.923 (13/38)|| 1.750 (20/35)|| 1.222 (27/33)|| 0.935 (31/29)|| 0.765 (34/26)
 +
|-
 +
| L || 2.923 || 1.750 || 1.222 || 0.848 || 0.649
 +
|-
 +
| M || 3.167 || 1.842 || 1.222 || 0.848 || 0.649
 +
|-
 +
| R || 3.250 || 1.895 || 1.308 || 1.033 || 0.765
 +
|-
 +
| S || 3.250 || 1.895 || 1.222 || 0.848 || 0.649
 +
|-
 +
| T || 3.250 || 1.895 || 1.222 || 0.935 || 0.714
 +
|-
 +
| V || 3.250 || 1.895 || 1.222 || 0.935 || 0.765
 +
|-
 +
| w || 3.167 || 1.842 || 1.308 || 1.033 || 0.714
 +
|}
  
B4BPU... - Exige S1 (uprated)
 
  
B4BPQ... - Exige S1 with LSD
 
  
G6BP... - Elise S2 111S
+
The number that follows the gear set number is the Final drive ratio
  
 +
4 = 4.200 (15/63)
  
[[Image:Gear_box_types.gif]]
+
5 = 4.062 (16/65)
  
 +
6 = 3.938 (16/63)
  
[[Image:pg1.jpg]]
+
7 = 3.647 (17/62)
  
  
=Other sources of information=
+
The next letter denotes the speedo gear type, always B for Lotus (note that the speedo cable is not used on the Elise).  Then a clutch release code, usually P which is a type of hydraulic release specific to mid-engined cars.  These may be followed by other letters, but on a Lotus only a Q or T for the type of limited slip differential:
  
 +
BP  = Open
  
 +
BPQ = Quaife LSD
  
[http://www.quaife.co.uk/catalogue/page44.htm  ATB DIFFERENTIALS]
+
BST = Torsen
 +
 
 +
== See also ==
 +
* [[Gearbox switch|Gearbox Reversing Switch]]
 +
* [[Gearbox oil|Gearbox oil]]
 +
* http://forums.seloc.org/t/96372
 +
* http://forums.seloc.org/t/110925
 +
 
 +
== External links ==
 +
* http://www.gearboxman.co.uk
 +
* http://superlightr300.free.fr/Manuels%20et%20Docs%20techniques/VVC_brochure_product.pdf
 +
*: WARNING - The Lotus line is '''wrong''' on the Powertrain brochure, as it has the B4 CR code but the G6 WR ratios
 +
* http://www.quaife.co.uk/
 +
* http://arc.seloc.org/viewthread.php?tid=173780 Gearbox drive program
 +
* http://wiki.seloc.org/a/Shimming_the_Powertrain_PG1_gearbox
 +
* http://www.rover-coupe.com/rcoc/index.php/downloads
 +
[[Category:Transmission]]
 +
[[Category:Lotus Elise]]
 +
[[Category:S1]]
 +
[[Category:S2]]

Latest revision as of 09:24, 22 November 2021

Pg1.jpg

The Rover PG1 gearbox fitted to the K series Elise, was manufactured by Powertrain Limited (who have now ceased trading), is a five-speed constant mesh gearbox, which employs helical gears for speed transmission and final drive. The transmission castings are full aluminium construction and all other components optimised for improved weight (36kg dry). The gearbox can be supplied with either a standard open differential or a Limited Slip Differential, presently Torsen.

Due to the modular design of the gearbox various final drive ratio and 1st to 5th gear ratio combinations have been used. Including both present and past an overall total of 21 ratio combinations, 5 speedometer gear ratios; and 7 clutch levers designs for both hydraulic and cable operation can be called on to ensure the customers requirements are met.

Gearbox type

Series number location on the bell housing

Identification is via the serial number on the bell housing housing;

Gearbox Application Table

Gearbox Code 1 2 3 4 5 Final Drive Used In
G6BP 3.250 1.895 1.308 1.033 0.848 3.938 S2 111S (WR "long" box)
C4BP 3.167 1.842 1.308 1.033 0.765 4.200 MGF VVC/Trophy (as standard but final drive 4.2)
C6BP 3.167 1.842 1.308 1.033 0.765 3.938 Elise S1 standard and MGF
B4BP 2.923 1.750 1.308 1.033 0.848 4.200 S1 111S & S1 Sports 135 & S2 135R & S2 standard (CR Box)
NA 3.167 1.842 1.308 1.033 0.848 4.200 Elise-spares
B4BPU 2.923 1.750 1.308 1.033 0.848 4.200 Exige S1 uprated (CR Box)
B4BPQ 2.923 1.750 1.308 1.033 0.848 4.200 Exige S1 with LSD (CR Box)
B6BST 2.923 1.750 1.308 1.033 0.848 3.938 Rover "BRM" 200 - CR box with std final drive & torsen LSD
340R UCR 3.000 1.937 1.556 1.273 1.043 3.920 340R LOTAC05255 Conversion
NA 3.167 1.842 1.410 1.100 0.909 3.938 Eliseparts
G4BSV 3.250 1.894 1.307 1.033 0.848 4.200 MG ZR 160 VVC
M4BSQ 2.923 1.894 1.500 1.269 1.034 4.200 MG ZR Motorsport Vehicles

Gearbox Codes

The first letter is the gearset

Letter 1 2 3 4 5
B 2.923 (13/38) 1.750 (20/35) 1.308 (26/34) 1.033 (30/31) 0.848 (33/28)
C 3.167 (12/38) 1.842 (19/35) 1.308 (26/34) 1.033 (30/31) 0.765 (34/26)
G 3.250 (12/39) 1.895 (19/36) 1.308 (26/34) 1.033 (30/31) 0.848 (33/28)
K 2.923 (13/38) 1.750 (20/35) 1.222 (27/33) 0.935 (31/29) 0.765 (34/26)
L 2.923 1.750 1.222 0.848 0.649
M 3.167 1.842 1.222 0.848 0.649
R 3.250 1.895 1.308 1.033 0.765
S 3.250 1.895 1.222 0.848 0.649
T 3.250 1.895 1.222 0.935 0.714
V 3.250 1.895 1.222 0.935 0.765
w 3.167 1.842 1.308 1.033 0.714


The number that follows the gear set number is the Final drive ratio

4 = 4.200 (15/63)

5 = 4.062 (16/65)

6 = 3.938 (16/63)

7 = 3.647 (17/62)


The next letter denotes the speedo gear type, always B for Lotus (note that the speedo cable is not used on the Elise). Then a clutch release code, usually P which is a type of hydraulic release specific to mid-engined cars. These may be followed by other letters, but on a Lotus only a Q or T for the type of limited slip differential:

BP = Open

BPQ = Quaife LSD

BST = Torsen

See also

External links