Difference between revisions of "Engine Control Unit"

From TechWiki
Jump to navigation Jump to search
(ECU location on S1 bootbox cars)
 
(19 intermediate revisions by 7 users not shown)
Line 1: Line 1:
 
{| border=1 cellpadding=5 cellspacing=0
 
{| border=1 cellpadding=5 cellspacing=0
−
! Car !! ECU !! Protocol/Bus !! Scanner !! Interface
+
! Car !! ECU !! Protocol/Bus !! Scanner !! Notes
 
|-
 
|-
−
| Elise S1 (120bhp) || MEMS 1.9 || proprietary || Rover Test-Book<br />[http://www.omitec.co.uk/products/product-details/SID/Product_IDAWETN/ Omitec] || 12, 10 or 5 pin?
+
| Elise S1 (120bhp) || MEMS 1.9 || proprietary || LotusScan (Connector SAE J1962)<br />or Rover Test-Book<br />[http://www.omitec.co.uk/products/product-details/SID/Product_IDAWETN/ Omitec] || 12, 10 or 5 pin?
 
|-
 
|-
−
| Elise S1 111S || MEMS 2J || [http://en.wikipedia.org/wiki/List_of_automation_protocols#Automobile_.2F_Vehicle_protocol_buses KWP2000]
+
| Elise S1 111S || MEMS 2J || proprietary || LotusScan (Connector SAE J1962)<br />or Rover Test-Book<br />[http://www.omitec.co.uk/products/product-details/SID/Product_IDAWETN/ Omitec] ||
 
|-
 
|-
−
| Elise S1 Sports 160<br />Elise S1 Sports 190<br />Exige S1<br />340R || EFi
+
| Elise S1 Sports 160 || GEMS (SVA, 50 cars) or EFi Euro1(EWVTA) ||
 
|-
 
|-
−
| Elise S2 K Series || K4 || [http://en.wikipedia.org/wiki/Controller_Area_Network CAN] || ? || 16(f) (2x8) SAE J1962 || First generation of Lotus ECU build for them by EFi<br />IPR of Lotus, but EFI do the manufacturing ||  
+
| Elise S1 Sports 190 || MEMS 1.9 (or Lotus K4 update kit) || proprietary || LotusScan (Connector SAE J1962)<br />or Rover Test-Book<br />[http://www.omitec.co.uk/products/product-details/SID/Product_IDAWETN/ Omitec] ||
 
|-
 
|-
−
| Elise S2 111R || T4 || CAN || ? || 16(f) (2x8) SAE J1962 ||
+
| Exige S1<br />340R || Lotus "918" ECU (As used in Esprit V8) || K-Line (9141) ||LotusScan2 (Connector SAE J1962) || Manufactured by EFi Technology Srl. ||
 +
|-
 +
| Elise S2 K Series || K4 || K-Line (9141) || LotusScan2 (Connector SAE J1962) || Manufactured by EFi Technology Srl. ||
 +
|-
 +
| Elise S2 K Series VVC || K4 160 || K-Line (9141) || LotusScan2 (Connector SAE J1962) || Manufactured by EFi Technology Srl. ||
 +
|-
 +
| Elise S2 111R<br />Exige S2 || T4 || K-Line (9141)|| LotusScan3 (Connector SAE J1962) ||Manufactured by EFi Technology Srl. ||
 +
|-
 +
| Elise S2 <br />Exige S2<br />with electronic throttle || T4e || K-Line (9141)<br />MY08 onward CAN|| Lotus Scan3 (Connector SAE J1962) ||Manufactured by EFi Technology Srl. ||
 +
|-
 +
| Elise S2 (1ZR, 2ZR) <br /> Evora <br /> Evora S <br /> Exige S (V6) || T6e || CAN || LotusScan3 (Connector SAE J1962) || Manufactured by EFi Technology Srl. ||
 
|-
 
|-
 
! Non Standard ECUs
 
! Non Standard ECUs
Line 20: Line 30:
  
  
−
S1 = For a s1 it's inside the boot on the left as you look at the car, near the bottom but on the back wall, peel back the carpet and you'll see it.
+
S1 = On bootbag cars, it's inside the boot on the left as you look at the car, near the bottom but on the back wall, peel back the carpet and you'll see it.  On bootbox cars, it is inside the engine bay on the rear bulkhead on the passenger side.
−
S2 = On a S2 its under the dash on the passenger side above the foot rest.
+
<br/>S2 = On a S2 its under the dash on the passenger side above the foot rest.
  
 
== K Series Elises ==
 
== K Series Elises ==
Line 39: Line 49:
  
 
[[image:LotusT4eECU.JPG|thumb|left|Lotus T4e ECU]]
 
[[image:LotusT4eECU.JPG|thumb|left|Lotus T4e ECU]]
−
Lotus T4e Engine Control Unit: fitted to electronically throttle controlled Toyota 2ZZ-GE engined cars.
+
[[image:T4e top.jpg|thumb|left|Lotus T4e ECU PCB Top]]
 +
[[image:T4e bottom.jpg|thumb|left|Lotus T4e ECU PCB Bottom after milling away tamper-proof cover]]
 +
Lotus T4e Engine Control Unit: fitted to electronically throttle controlled Toyota 1ZZ-FE, 2ZZ-GE and 2ZZ-GZE engined cars.
 +
 
 +
'''Contains'''
 +
* L9612 K Line Transceiver
 +
* L9822EPD Octal Serial Solenoids
 +
* MC68HC908JL8 CPU HC08 comp.
 +
* MC33394FS CAN Transceiver & Power Mgmt
 +
* MPX4001A Pressure Sensor
 +
* TLE6220 Quad Low-Side Switch
 +
* MPC563 Main CPU (PowerPC Core) - 512kb Flash, 32Kb SRAM
 
{{clr}}
 
{{clr}}
−
 
  
 
== Aftermarket ECUs ==
 
== Aftermarket ECUs ==
 
[[image:M3DK.JPG|thumb|left|Emerald M3DK]]
 
[[image:M3DK.JPG|thumb|left|Emerald M3DK]]
−
The [[Emerald]] M3DK is a plug compatible replacement ECU for the Rover MEMS unit used on the K series, it utilises the existing engine sensors and works with distributor based systems and distributorless 'wasted spark' systems.  It is compatible with the immobiliser as fitted to Elises and Caterhams.  It is fully programmable and comes complete with software, manual, comms cable and example maps. It has user tailorable soft and hard cut rev-limits and a user programmable shift light.
+
The [[Emerald]] M3DK is a plug compatible replacement ECU for the Rover MEMS unit used on the K series, it utilises the existing engine sensors and works with distributor based systems and distributorless 'wasted spark' systems.  It is compatible with the immobiliser as fitted to Elises and Caterhams.  It is fully programmable and comes complete with software, manual, comms cable and example maps. It has user tailorable soft and hard cut rev-limits and a user programmable shift light. Narrowband and wideband lambda sensors are supported by utilising the 0-5v analogue input.
 
{{clr}}
 
{{clr}}
  
Line 55: Line 75:
  
 
The mapping process will involve your car being run on a rolling road for a period of time, with an operator changing the map on the fly. The rolling road will then allow the operator to add the optimum values to the map.
 
The mapping process will involve your car being run on a rolling road for a period of time, with an operator changing the map on the fly. The rolling road will then allow the operator to add the optimum values to the map.
 +
 +
 +
{| border="1"
 +
!Name & Website !! Address & Google map reference
 +
|-
 +
| [http://www.sinclairemotorsport.com Sinclaire Motorsport]
 +
| Sinclaire House, Bryant Avenue, Romford [http://maps.google.co.uk/maps?hl=en&q=RM3+0AP RM3 0AP]
 +
|-
 +
|}
 +
  
 
{| border="1"
 
{| border="1"
Line 64: Line 94:
 
|}
 
|}
  
 +
 +
{| border="1"
 +
!Name & Website !! Address & Google map reference
 +
|-
 +
| [http://www.hangar111.com Hangar 111 Lotus Performance]
 +
| Unit8b Seven Acres Business Park, Waldringfield, Suffolk [http://maps.google.co.uk/maps?f=q&source=s_q&hl=en&geocode=&q=Hangar+111&sll=52.058349,1.300786&sspn=0.006306,0.019226&g=IP12+4PS&ie=UTF8&ll=52.058982,1.300786&spn=0.006306,0.019226&z=16&iwloc=A IP12 4UH]
 +
|-
 +
|}
  
 
== See Also ==
 
== See Also ==
 
* http://en.wikipedia.org/wiki/Engine_Control_Unit
 
* http://en.wikipedia.org/wiki/Engine_Control_Unit
 
* http://en.wikipedia.org/wiki/OBD-II_PIDs
 
* http://en.wikipedia.org/wiki/OBD-II_PIDs
 +
* [http://www.mgfcar.de/library/ENGINE_MANAGEMENT_SYSTEM_%20MPi_VVC_MEMS_3.htm VVC MEM3 usage of sensors]
  
 
== Forum links ==
 
== Forum links ==
Line 78: Line 117:
 
[[Category:Electrical]]
 
[[Category:Electrical]]
 
[[Category:Lotus Elise]]
 
[[Category:Lotus Elise]]
 +
[[Category:Lotus Evora]]
 
[[Category:S1]]
 
[[Category:S1]]
 
[[Category:S2]]
 
[[Category:S2]]
 +
[[Category:Lotus 2-Eleven]]
 +
[[Category:S2 Exige]]
 +
[[Category:Exige V6]]

Latest revision as of 14:04, 13 January 2020

Car ECU Protocol/Bus Scanner Notes
Elise S1 (120bhp) MEMS 1.9 proprietary LotusScan (Connector SAE J1962)
or Rover Test-Book
Omitec		 12, 10 or 5 pin?
Elise S1 111S MEMS 2J proprietary LotusScan (Connector SAE J1962)
or Rover Test-Book
Omitec
Elise S1 Sports 160 GEMS (SVA, 50 cars) or EFi Euro1(EWVTA)
Elise S1 Sports 190 MEMS 1.9 (or Lotus K4 update kit) proprietary LotusScan (Connector SAE J1962)
or Rover Test-Book
Omitec
Exige S1
340R		 Lotus "918" ECU (As used in Esprit V8) K-Line (9141) LotusScan2 (Connector SAE J1962) Manufactured by EFi Technology Srl.
Elise S2 K Series K4 K-Line (9141) LotusScan2 (Connector SAE J1962) Manufactured by EFi Technology Srl.
Elise S2 K Series VVC K4 160 K-Line (9141) LotusScan2 (Connector SAE J1962) Manufactured by EFi Technology Srl.
Elise S2 111R
Exige S2		 T4 K-Line (9141) LotusScan3 (Connector SAE J1962) Manufactured by EFi Technology Srl.
Elise S2
Exige S2
with electronic throttle		 T4e K-Line (9141)
MY08 onward CAN		 Lotus Scan3 (Connector SAE J1962) Manufactured by EFi Technology Srl.
Elise S2 (1ZR, 2ZR)
Evora
Evora S
Exige S (V6)		 T6e CAN LotusScan3 (Connector SAE J1962) Manufactured by EFi Technology Srl.
Non Standard ECUs
N/A MEMS 3 KWP2000
N/A Emerald


S1 = On bootbag cars, it's inside the boot on the left as you look at the car, near the bottom but on the back wall, peel back the carpet and you'll see it. On bootbox cars, it is inside the engine bay on the rear bulkhead on the passenger side.
S2 = On a S2 its under the dash on the passenger side above the foot rest.

K Series Elises

EFi Technology EURO1 ECU

EFi Technology Srl ( http://www.efitechnology.it ) "Euro1" ECU: Fitted to EWVTA S1 Sport160 cars.

Lotus K4 ECU

Lotus K4 Engine Control Unit: fitted to S2 Elise with K-series(i.e. 122ps, 135ps, 158ps VVC, Sport190)


Toyota Elises

Lotus T4 ECU

Lotus T4 Engine Control Unit: fitted to all manual throttle controlled Toyota 2ZZ-GE engined cars.

Lotus T4e ECU
Lotus T4e ECU PCB Top
Lotus T4e ECU PCB Bottom after milling away tamper-proof cover

Lotus T4e Engine Control Unit: fitted to electronically throttle controlled Toyota 1ZZ-FE, 2ZZ-GE and 2ZZ-GZE engined cars.

Contains

  • L9612 K Line Transceiver
  • L9822EPD Octal Serial Solenoids
  • MC68HC908JL8 CPU HC08 comp.
  • MC33394FS CAN Transceiver & Power Mgmt
  • MPX4001A Pressure Sensor
  • TLE6220 Quad Low-Side Switch
  • MPC563 Main CPU (PowerPC Core) - 512kb Flash, 32Kb SRAM


Aftermarket ECUs

Emerald M3DK

The Emerald M3DK is a plug compatible replacement ECU for the Rover MEMS unit used on the K series, it utilises the existing engine sensors and works with distributor based systems and distributorless 'wasted spark' systems. It is compatible with the immobiliser as fitted to Elises and Caterhams. It is fully programmable and comes complete with software, manual, comms cable and example maps. It has user tailorable soft and hard cut rev-limits and a user programmable shift light. Narrowband and wideband lambda sensors are supported by utilising the 0-5v analogue input.

ECU mapping

If you make substantial changes to your car setup or simply want to ensure that the ECU is correctly configured to control the fuel system, then you could consider a "mapping" session on a rolling road.

ECUs generally work by comparing the engine speed in rpm to the position of the throttle. The ECU then compares these values on a "map" to find the correct amount of fuel to add. This ensures that an engine is not running too rich or too lean, both of which can be undesirable with the latter leading to detonation.

The mapping process will involve your car being run on a rolling road for a period of time, with an operator changing the map on the fly. The rolling road will then allow the operator to add the optimum values to the map.


Name & Website Address & Google map reference
Sinclaire Motorsport Sinclaire House, Bryant Avenue, Romford RM3 0AP


Name & Website Address & Google map reference
JKM Performance Bolde Close, Copnor, Portsmouth, Hampshire, PO3 5RD


Name & Website Address & Google map reference
Hangar 111 Lotus Performance Unit8b Seven Acres Business Park, Waldringfield, Suffolk IP12 4UH

See Also

Forum links

External links

Retrieved from ‘https://wiki.seloc.org/index.php?title=Engine_Control_Unit&oldid=12922’