Wheel bearings: Difference between revisions
Jump to navigation
Jump to search
Hbaumhardt (talk | contribs) |
Hbaumhardt (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 12: | Line 12: | ||
The Rover S2 uses 3 identical bearing packs without built-in sensor and 1 pack with a sensor for the ECU (which then relays it to the speedo) on one of the rear wheels. | The Rover S2 uses 3 identical bearing packs without built-in sensor and 1 pack with a sensor for the ECU (which then relays it to the speedo) on one of the rear wheels. | ||
These bearing packs originate from the Opel/Vauxhall Astra G front axle | These bearing packs originate from the Opel/Vauxhall Astra G front axle. | ||
====OEM Lotus part numbers==== | ====OEM Lotus part numbers==== | ||
| Line 29: | Line 29: | ||
* bearing packs | * bearing packs | ||
* new mounting bolts (approx 10mm too long for the Elise can be cut down) | * new mounting bolts (approx 10mm too long for the Elise can be cut down - M12 x 40 Metric fine thread which are hard to find, best order Lotus OE A116W1170F) | ||
* new castle nut for the driveshaft/CV | * new castle nut for the driveshaft/CV | ||
* new split pin for castle nut | * new split pin for castle nut | ||
Latest revision as of 19:18, 9 June 2011
Wheel Bearings
[edit | edit source]Please Add Info
Elise S1
[edit | edit source]Timken JRM3938A.
Elise S2 Non ABS
[edit | edit source]The Rover S2 uses 3 identical bearing packs without built-in sensor and 1 pack with a sensor for the ECU (which then relays it to the speedo) on one of the rear wheels.
These bearing packs originate from the Opel/Vauxhall Astra G front axle.
OEM Lotus part numbers
[edit | edit source]- Bearing pack without built-in speed sensor: A117D6002F
- Bearing pack with built-in speed sensor: A117D6005F
Replacment parts
[edit | edit source]Bearing units are originally made by SKF who also sell complete aftermarket replacement kits:
- SKF VKBA3510 without sensor
- SKF VKBA3511 with sensor
Both SKF kits come including:
- bearing packs
- new mounting bolts (approx 10mm too long for the Elise can be cut down - M12 x 40 Metric fine thread which are hard to find, best order Lotus OE A116W1170F)
- new castle nut for the driveshaft/CV
- new split pin for castle nut
- dust cover for center
Elise S2 ABS
[edit | edit source]Use 4 identical bearing packs, ALL with speed pulse for the ABS signal (which in turn feeds that to the ECU)
For part numbers see the 'with speed sensor' entries above.