Remove the wheels: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 3: | Line 3: | ||
Refit the road wheel and nip up the wheel bolts. Check that there is no side to side play by trying to rock the wheel at a quarter to three. | Refit the road wheel and nip up the wheel bolts. Check that there is no side to side play by trying to rock the wheel at a quarter to three. | ||
=== Fitting === | === Fitting === | ||
| Line 19: | Line 18: | ||
[[Image:brokenbolt.JPG]] | [[Image:brokenbolt.JPG]] | ||
{{clr}} | {{clr}} | ||
===Wheel Bolts === | |||
The S2 wheel bolts are: | |||
M12x1.5 bolt with a tapered seat. (eg. Vauxhall Corsa) | |||
The length should be 25-30mm | |||
[[Category:DIY]] | [[Category:DIY]] | ||
Revision as of 22:15, 21 March 2007
Removal
Refit the road wheel and nip up the wheel bolts. Check that there is no side to side play by trying to rock the wheel at a quarter to three.
Fitting
Step 34. Lower car to the ground and torque wheel bolts to 105NM (S2) 80-85NM (S1). Depress brake pedal a few times to get the pressure back.
Warning
Do not over torque the nuts they will shear invest in a torque wrench or you will end up paying out for a new set of wheel bolts.
Wheel Bolts
The S2 wheel bolts are:
M12x1.5 bolt with a tapered seat. (eg. Vauxhall Corsa)
The length should be 25-30mm