Remove the wheels: Difference between revisions
mNo edit summary |
|||
| Line 33: | Line 33: | ||
M12x1.5 bolt with a tapered seat. (eg. Vauxhall Corsa) | M12x1.5 bolt with a tapered seat. (eg. Vauxhall Corsa) | ||
The length should be 25-30mm | The length should be 25-30mm. | ||
Louts Part numbers: | |||
Standard Wheel Bolt Elise S2: B117G6000F | |||
Wheel Nut Elise S1: A111G6001F '''please confirm''' | |||
[[Category:DIY]] | [[Category:DIY]] | ||
Revision as of 13:32, 22 March 2007
Removal
Loosen the 4 wheel bolts with bolt tools found in the Tool roll then jack up the car, then undo the wheel bolts and remove the wheel.
Fitting
Refit the wheel, replace the 4 wheel bolts so they are hand tight then lower car to the ground and torque wheel bolts to
105NM (S2)
80-85NM (S1)
Check that there is no side to side play by trying to rock the wheel at a quarter to three.
Depress brake pedal a few times to get the pressure back.
Warning
Do not over torque the nuts they will shear invest in a torque wrench or you will end up paying out for a new set of wheel bolts.
Wheel Bolts
The S2 wheel bolts are:
M12x1.5 bolt with a tapered seat. (eg. Vauxhall Corsa)
The length should be 25-30mm.
Louts Part numbers:
Standard Wheel Bolt Elise S2: B117G6000F
Wheel Nut Elise S1: A111G6001F please confirm