Difference between revisions of "Replace the horn"

From TechWiki
Jump to navigation Jump to search
m
m
Line 47: Line 47:
  
 
[[Category:DIY]]
 
[[Category:DIY]]
 +
[[Category:Electrical]]
 +
[[Category:Lotus Elise]]
 +
[[Category:S1]]
 +
[[Category:S2]]
 
{{clr}}
 
{{clr}}

Revision as of 13:45, 17 April 2007

S2 Horn

This Should take about 2 hours max ( but leave time for 3 ).


  • Jack up and secure car.
  • Remove Drivers side wheel.
  • Remove the right access panel, and fuse cover and remove horn fuse (7.5AMP)
Remove the Horn Fuse


  • Remove mudflap screws and pull mudflaps away to gain access to the old horn, there is a 8mm nut and two wires that you need to disconnect.
Removing of the mudflaps


  • Attach the new horn in place of the old horn.
The old horn


New Horn


  • You may need to drill a hole in the side, but there are lots there already, to make use of.
New Horn in Place


New Horn in Place


  • A Top Tip is put the tubing in hot water to help it fit over the connectors of the unit and horn ends.
  • Once new horn is fitted, fit a new 25AMP fuse inplace of the old 7.5AMP fuse you took out at the begining.
  • Test horn, Jobs a carrot


Horn From Eliseparts