Remove the wheels

Time & Tools
Time:	30 mins
Tools:	Tool roll, Jack, 17mm socket, Wheel brace/extension bar, Copper grease

Removal

Loosen the 4 wheel bolts with bolt tools found in the Tool roll then jack up the car, then undo the wheel bolts and remove the wheel.

Fitting

Refit the wheel, replace the 4 wheel bolts so they are hand tight then lower car to the ground and torque wheel bolts to

105NM (S2)

80-85NM (S1)

Check that there is no side to side play by trying to rock the wheel at a quarter to three.

Depress brake pedal a few times to get the pressure back.

Warning

Do not over torque the nuts they will shear invest in a torque wrench or you will end up paying out for a new set of wheel bolts.

S1

M12 x 1.5 pitch thread

Be careful as they have a conical seat not a taper.

Wheel Nut Elise S1: A111G6001F please confirm

S2

The S2 wheel bolts are:

M12x1.5 bolt with a tapered seat. (eg. Vauxhall Corsa)

The length should be 25-30mm.

Standard Wheel Bolt Elise S2: B117G6000F