Replace the horn

S2 Horn

• Jack up and secure car.

• Remove Drivers side wheel.

• Remove the right access pannel, and fuse cover and remove horn fuse (7.5AMP)

Remove the Horn Fuse

• Remove mudflap screws and pull mudflaps away to gain access to the old horn, there is a 8mm nut and two wires that you need to disconnect.

Removing of the mudflaps

• Attach the new horn in place of the old horn.

The old horn

New Horn

• You may need to drill a hole in the side, but there are lots there already, to make use of.

New Horn in Place

New Horn in Place

• A Top Tip is put the tubing in hot water to help it fit over the connectors of the unit and horn ends.

• Once new horn is fitted, fit a new 25AMP fuse inplace of the old 7.5AMP fuse you took out at the begining.

• Test horn, Jobs a carrot

Horn From Eliseparts