Difference between revisions of "Remove the wheels"
Jump to navigation
Jump to search
m |
m (→Fitting) |
||
| Line 6: | Line 6: | ||
=== Fitting === | === Fitting === | ||
| − | + | Lower car to the ground and torque wheel bolts to 105NM (S2) 80-85NM (S1). Depress brake pedal a few times to get the pressure back. | |
[[Image:36_Torque_Wheel_Bolts.JPG]] | [[Image:36_Torque_Wheel_Bolts.JPG]] | ||
{{clr}} | {{clr}} | ||
| − | |||
=== Warning === | === Warning === | ||
Revision as of 23:21, 21 March 2007
Removal
Refit the road wheel and nip up the wheel bolts. Check that there is no side to side play by trying to rock the wheel at a quarter to three.
Fitting
Lower car to the ground and torque wheel bolts to 105NM (S2) 80-85NM (S1). Depress brake pedal a few times to get the pressure back.
Warning
Do not over torque the nuts they will shear invest in a torque wrench or you will end up paying out for a new set of wheel bolts.
Wheel Bolts
The S2 wheel bolts are:
M12x1.5 bolt with a tapered seat. (eg. Vauxhall Corsa)
The length should be 25-30mm