Difference between revisions of "Remove the wheels"

Revision as of 14:32, 22 March 2007

Loosen the 4 wheel bolts with bolt tools found in the Tool roll then jack up the car, then undo the wheel bolts and remove the wheel.

Refit the wheel, replace the 4 wheel bolts so they are hand tight then lower car to the ground and torque wheel bolts to

105NM (S2)

80-85NM (S1)

Check that there is no side to side play by trying to rock the wheel at a quarter to three.

Depress brake pedal a few times to get the pressure back.

Do not over torque the nuts they will shear invest in a torque wrench or you will end up paying out for a new set of wheel bolts.

The S2 wheel bolts are:

M12x1.5 bolt with a tapered seat. (eg. Vauxhall Corsa)

The length should be 25-30mm.

Louts Part numbers:

Standard Wheel Bolt Elise S2: B117G6000F

Wheel Nut Elise S1: A111G6001F please confirm

@@ Line 33: / Line 33: @@
 M12x1.5 bolt with a  tapered seat. (eg. Vauxhall Corsa)
-The length should be 25-30mm
+The length should be 25-30mm.
+Louts Part numbers:
+Standard Wheel Bolt Elise S2: B117G6000F
+Wheel Nut Elise S1: A111G6001F '''please confirm'''
 [[Category:DIY]]