Difference between revisions of "Remove the wheels"
m (How to remove the wheels moved to Remove the wheels: Remove the wheels) |
m (→Wheel Bolts) |
||
| Line 30: | Line 30: | ||
===Wheel Bolts === | ===Wheel Bolts === | ||
| + | |||
| + | |||
| + | |||
| + | ===S1=== | ||
| + | |||
| + | M12 x 1.5 pitch thread | ||
| + | |||
| + | Be careful as they have a conical seat not a taper. | ||
| + | |||
| + | Wheel Nut Elise S1: A111G6001F '''please confirm''' | ||
| + | |||
| + | |||
| + | ===S2=== | ||
| + | |||
The S2 wheel bolts are: | The S2 wheel bolts are: | ||
| Line 36: | Line 50: | ||
The length should be 25-30mm. | The length should be 25-30mm. | ||
| − | |||
| − | |||
Standard Wheel Bolt Elise S2: B117G6000F | Standard Wheel Bolt Elise S2: B117G6000F | ||
| − | |||
Revision as of 12:41, 2 July 2007
| Time & Tools | |
| Time: | 30 mins |
|---|---|
| Tools: | Tool roll, Jack, 17mm socket, Wheel brace/extension bar, Copper grease |
Removal
Loosen the 4 wheel bolts with bolt tools found in the Tool roll then jack up the car, then undo the wheel bolts and remove the wheel.
Fitting
Refit the wheel, replace the 4 wheel bolts so they are hand tight then lower car to the ground and torque wheel bolts to
105NM (S2)
80-85NM (S1)
Check that there is no side to side play by trying to rock the wheel at a quarter to three.
Depress brake pedal a few times to get the pressure back.
Warning
Do not over torque the nuts they will shear invest in a torque wrench or you will end up paying out for a new set of wheel bolts.
Wheel Bolts
S1
M12 x 1.5 pitch thread
Be careful as they have a conical seat not a taper.
Wheel Nut Elise S1: A111G6001F please confirm
S2
The S2 wheel bolts are:
M12x1.5 bolt with a tapered seat. (eg. Vauxhall Corsa)
The length should be 25-30mm.
Standard Wheel Bolt Elise S2: B117G6000F