Difference between revisions of "Remove the rear undertray"
Jump to navigation
Jump to search
(→S2) |
|||
| Line 10: | Line 10: | ||
How is this different? | How is this different? | ||
| − | ==S2== | + | == S2 == |
| + | The rear undertray is actually two trays bolted together. Although it is only the rearmost of the two trays that need to be removed, it is sometimes simpler to remove both together. | ||
| + | |||
| + | === Just the rearmost tray === | ||
[[Image:boltorder.JPG|thumb|left|Bolt removal order]] | [[Image:boltorder.JPG|thumb|left|Bolt removal order]] | ||
Recommended Removal order of the rear under tray bolts are: - | Recommended Removal order of the rear under tray bolts are: - | ||
| − | #Remove all the 'RED' doted bolts first, they are 8MM. | + | # Remove all the 'RED' doted bolts first, they are 8MM. |
| − | #Remove the 'GREEN' dotted bolt, also 8MM. | + | # Remove the 'GREEN' dotted bolt, also 8MM. |
| − | #Finally remove the 'BLUE' doted Allen bolts. | + | # Finally remove the 'BLUE' doted Allen bolts. |
# Dont forget that when you replace the tray that the back tray goes under the middle tray , not on top of. | # Dont forget that when you replace the tray that the back tray goes under the middle tray , not on top of. | ||
{{clr}} | {{clr}} | ||
Revision as of 11:10, 11 September 2006
| Time & Tools | |
| Time: | 10mins |
|---|---|
| Tools: | 5mm Allen Key, 8mm Socket, Wrench |
The rear undertray, or rear tray, needs to be removed for most jobs involving the exhaust system. It's a relatively simple job and can be done without needing to jack the car. There are in fact two rear undertrays (back and middle) which are bolted together (a third being the front undertray).
S1
How is this different?
S2
The rear undertray is actually two trays bolted together. Although it is only the rearmost of the two trays that need to be removed, it is sometimes simpler to remove both together.
Just the rearmost tray
Recommended Removal order of the rear under tray bolts are: -
- Remove all the 'RED' doted bolts first, they are 8MM.
- Remove the 'GREEN' dotted bolt, also 8MM.
- Finally remove the 'BLUE' doted Allen bolts.
- Dont forget that when you replace the tray that the back tray goes under the middle tray , not on top of.
8MM Bolt removal, this is one of 12
All 8MM Bolts removed
one of the two back allen 5MM bolts
Removing of the 5MM allen bolts
