Difference between revisions of "Remove the rear undertray"
Jump to navigation
Jump to search
(→S2) |
|||
| Line 25: | Line 25: | ||
Image:TRAY4.JPG|Removing of the 5MM allen bolts | Image:TRAY4.JPG|Removing of the 5MM allen bolts | ||
</gallery> | </gallery> | ||
| + | |||
| + | [[Category:DIY]] | ||
Revision as of 16:57, 4 September 2006
| Time & Tools | |
| Time: | 10mins |
|---|---|
| Tools: | 5mm Allen Key, 8mm Socket, Wrench |
The rear undertray, or rear tray, needs to be removed for most jobs involving the exhaust system. It's a relatively simple job and can be done without needing to jack the car. There are in fact two rear undertrays (back and middle) which are bolted together (a third being the front undertray).
S1
How is this different?
S2
Recommended Removal order of the rear under tray bolts are: -
- Remove all the 'RED' doted bolts first, they are 8MM.
- Remove the 'GREEN' dotted bolt, also 8MM.
- Finally remove the 'BLUE' doted Allen bolts.
- Dont forget that when you replace the tray that the back tray goes under the middle tray , not on top of.
8MM Bolt removal, this is one of 12
All 8MM Bolts removed
one of the two back allen 5MM bolts
Removing of the 5MM allen bolts
