Search results

[[Image:How to fit a front splitter.jpg|thumb|left|Front splitter]] Fitting a [[front splitter]] to the front of your car couldn't be easier.

...ultimately the cover becoming detached. Popular myth has it that the rear clam has to be removed to access the bolt. Not so. ...gine to catch the bolts/shims that you will drop that then necessitate the removal of the undertray to retrieve!

Guide to removing the front bumper on the Lotus Evora. By Hyperviper: https://forums.seloc.org/p/780486 Jack up the car and remove the front wheels, place car on axle stands.

...n the fitting of the new front hoses will require the removal of the front clam due to the ABS unit.

The standard badge on the S1 Elise, as with older Lotus', is bolted to the front bodywork. ...is obstructed by the crash structure and so to remove the badge either the front clamshell must be removed from the car or the badge can be drilled through.

...iator mounting panel and other panels using threaded fasteners for ease of removal and to facilitate service access and body repair. ...icle provides a step-by-step procedure to facilitate in the removal of the front clamshell to enable maintenance work to be carried out.

...o, via extensions at each side, to provide a mounting point for the inside front of the clamshell wheelarch. The radiator must be removed for access to the '''1. [[Remove the front clamshell|Remove S2 front clamshell]]'''

...rvo in the way of the heater/resistor pack, so cannot be accessed from the front service panels. ...matrix, avoiding future corrosion, but this will require the removing the front clamshell.

| S1 Front Ball Joint Mount 332g/Each || Eliseparts Aluminium Ball Joint Mount 122g/ ...tec CF Front Clam 4.95 kg Vs std at 15 kg but cost £58k :( Benetec CF Rear Clam 7,2kg

...o weight ratio achieved by the reduction in the vehicles unladen weight by removal of NVH trims, radio, speakers, alarm and SRS system.<br /><br /> ...owing strap fitted and the front grille modified to allow fitment over the front towing eye to comply with track day and race regulations.<br /><br />