Category:DIY: Difference between revisions

Latest revision as of 15:19, 9 July 2012

The following 56 pages are in this category, out of 56 total.

@@ Line 1: / Line 1: @@
-After 12 years I decided to change them
-[img=800x600]http://gallery.seloc.org/albums/userpics/21157/FILE0465.JPG[/img]
-[img=800x600]http://gallery.seloc.org/albums/userpics/21157/FILE0465.JPG[/img]
-Off with:
-- window winder
-- door card
-Now this may not be they way you would do it but I used a scraper to gently push the clips down one by one:
-[img=800x600]http://gallery.seloc.org/albums/userpics/21157/FILE0467.JPG[/img]
-A few fell down in the door but most stayed on the old rubber. It was not too long before it was off:
-[img=800x600]http://gallery.seloc.org/albums/userpics/21157/FILE0468.JPG[/img]
-- Took out the window, undoing the 3 10mm nuts that secure the window to the runner.
-- Trimmed the new seal using tin snips
-- put double sided tap on the seal
-- placed the seal on the door as per the instructions
-- re attached the clips
-- put the window back in, door cards and winder.
-[img=800x600]http://gallery.seloc.org/albums/userpics/21157/FILE0476.JPG[/img]
-Same for the other side:
-[img=800x600]http://gallery.seloc.org/albums/userpics/21157/FILE0477.JPG[/img]