Search results

Page title matches

• Diy black wheels
  '''D.I.Y. Black Wheels''' ...ns without stopping on a spot seemed to work best. I used Hammerite smooth black aerosol paint (x2 400ml tins) and painted the inside of the wheel with the
  2 KB (386 words) - 14:16, 19 January 2012

Page text matches

• Interior - Exige V6
  * Only available trimmed in black cloth.<br /> * Choice of leather colours: Ebony Black, Venom Red, Ivory White, Ash Grey, Cocoa Brown, Cognac Brown, Imperial Blue
  3 KB (529 words) - 20:11, 27 February 2013
• Installing an iPod radio
  ...and two at the bottom, twist from the bottom as this will gently pull the black plastic insert away from the passenger dash tray. ...t, as far as it will go, then put you hand up, where the lower part of the black dash was and pull the cable, then thread the required amount on to the pass
  4 KB (639 words) - 22:13, 30 April 2008
• How to Fit A Spray Bar
  ...me sort of drainage slit around 5-10mm in height ( right at the end of the black plastic where the washer jets sit on ). ...the stanley knife . Cut a nice slit on the piece that is connected to the black Pump nozzle. You can now cable tie this hose up as it is no longer needed .
  2 KB (309 words) - 13:17, 20 February 2011
• Diecast models
  | Black<br />Blue<br />Silver | Yellow and Black
  5 KB (746 words) - 09:13, 28 September 2012
• Elise/Exige RGB registry
  |Starlight Black
  539 bytes (71 words) - 16:47, 26 August 2015
• Diy black wheels
  '''D.I.Y. Black Wheels''' ...ns without stopping on a spot seemed to work best. I used Hammerite smooth black aerosol paint (x2 400ml tins) and painted the inside of the wheel with the
  2 KB (386 words) - 14:16, 19 January 2012
• Flag Signals
  [[image:flag_black.gif]] '''Black Flag''' [[image:flag_meatball.gif]] '''Black flag with an orange disc 40cm in diameter'''
  5 KB (889 words) - 15:13, 1 March 2009
• Paint Colours - Evora
  | [[image:Evora - Starlight Black (Metallic).jpg|200px]] || Starlight Black || B93 || £570 | [[image:Evora - Phantom Black (Lifestyle).jpg|200px]] || Phantom Black || B123 || £1,100
  3 KB (422 words) - 15:09, 10 January 2019
• Coolant system
  ...does nothing and the only one that is actually connected to the ECU is the black one. The blue one does have a connector attached to it, but it doesn't do a
  752 bytes (119 words) - 22:27, 3 June 2008
• Interior - Evora
  [[image:Swatch - Ebony Black.png|100px]] [[image:Swatch - Charcoal Cloth.png|100px]] ...ce of colours: Oyster (Magnolia), Chestnut (Tan), Paprika (Red), Charcoal (Black)
  5 KB (817 words) - 07:40, 28 September 2013
• Temperature sender
  The S2 (Rover engine) has a single (black) temperature sender for both ECU and dash.
  921 bytes (138 words) - 22:52, 19 May 2009
• Timing Strut for Sprinting
  ...more than 200mm from the ground. This strut must then be finished in matt black. ...with how everything fits you just need to give it all a quick coat of mat black spray paint and your done.
  3 KB (590 words) - 21:43, 2 May 2010
• Hardtop
  Image:s1top4.jpg|Aftermarket S1 Hardtop in black gel coat Image:s2top1.jpg|Long Tail Hardtop in black gel coat
  3 KB (504 words) - 14:12, 17 April 2007
• S1 Brake Light Switch
  ...ke), look behind the brake/clutch fluid reservoir and you will see a small black box with 2 wire coming from it. Its at the top of the pic below.
  1 KB (270 words) - 20:33, 18 October 2007
• Normal running temperature
  The S2 (Rover engine) has a single (black) temperature sender for both ECU and dash. There is a legacy blue housing, The S2 and S3 (Toyota engine) has a single black temperature sender, although different part numbers in the 1Z and 2Z engine
  2 KB (279 words) - 20:57, 2 May 2018
• Pricing and Upgrades (2013)
  ...rts, leather trimmed centre console, black leather handbrake lever gaiter, black carpet mats with embroidered Elise logo, noise insulation panelling, auxili ...ack and Touring Pack together and the sport seat will be trimmed in either black leather or SuedeTex®) and Sports mode for Lotus DPM
  12 KB (1,532 words) - 21:48, 2 April 2013
• Headlight Switch Panel
  ...screws at the top and 2 screws on the face. If they are hidden behind the black adhesive sticker, then puncture a hole through the sticker.
  1 KB (209 words) - 22:21, 3 September 2007
• Headlight dip setting
  ...he lower half of the lens. This is a small lever that has a small piece of black plastic on it. If this lever is gently pushed up it moves a few mm which cu
  1 KB (191 words) - 14:16, 17 April 2007
• Additional power outlet for S1 dash
  ...ck that the right-hand most "switch" in your light panel is a dummy. It's black and doesn't do anything. If it does something (Air-con in some non-uk cars ...and black wire in the connector. The earth wire (normally black) goes to black. Connect some accessory (I used a USB adaptor with an LED indicator) and t
  4 KB (654 words) - 14:03, 18 June 2014
• Windscreen washer mod
  # Get hold of some small black cable ties and an adjustable spanner. Some black electrical tape is also handy. # Post the black tube from the Peugeot part through the nozzle hole, and connect it to the h
  7 KB (1,229 words) - 14:53, 6 February 2012
• Wheels and tyres - Exige V6
  ...Gold, cast | 120px]] <br /> [[File:Exige S Wheel (Satin Black).png | Satin Black, cast | 120px]] [[File:Exige S Wheel (Candy Red).png | Candy Red, cast | 12 | Gloss Black<br />Silver<br />Diamond Cut<br />Gold (LF1)<br />Satin Black<br />Candy Red (Cup 360)
  9 KB (1,370 words) - 13:04, 13 November 2021
• Pricing and Upgrades (2012)
  ...nsert panel, leather footwell side panels, choice of leather colour: Ebony Black, Ivory White, Venom Red, Cognac Brown, Imperial Blue, Cocoa Brown, Ash Grey ...ate insert panel, leather footwell side panels, SuedeTex® trim band, Ebony Black leather and Slate Grey SuedeTex® seat combination (front and rear on 2+2)
  19 KB (2,495 words) - 13:15, 29 August 2012
• Brakes - V6
  ...es | MY12 Evora]] the Sports Pack brake caliper colour was changed to Red (Black being a non-cost option). The actual caliper used is the same regardless of
  2 KB (305 words) - 16:05, 15 September 2013
• Paint Colours - 2012
  | Starlight Black | align="center" | [[Image:Swatch - Starlight Black.png]]
  7 KB (1,017 words) - 16:59, 15 August 2013
• Petrol Cap
  All that was left inside were the plastic ratchet (1), metal collar (2) and black plastic retainer (3)[[image:fuel cap 2.jpg|thumb|left]]. [[image:fuel cap 4.jpg|thumb|left]]Be very careful not to damage the black plastic retainer. You need this to fit the new components.
  6 KB (1,092 words) - 13:32, 14 August 2015
• Lambda sensor
  *Black - Terminal 1 - sensor signal (+_ve) *Disconnect the sensor from the ECU at the square, black plastic connector, so that the sensor's voltage may be measured in isolatio
  5 KB (860 words) - 06:56, 1 September 2022
• Cleaning products
  '''Plastic fins & other black trim''' '''1.'''Carplan Tyre Slik (Wins tyre black of the year every year)
  3 KB (409 words) - 23:07, 4 November 2018
• S2 interior plastics refurb
  ...looked good and the stories checked out, so I ordered a few cans of Satin Black and the recommended prep / priming products from the sole UK supplier. 3 coats of adhesion promoter / 3 coats of Satin Black / 2 coats of matt clear coat
  3 KB (600 words) - 16:25, 26 May 2020
• VVC Information
  | 06 || Blue || VVC Oil Temp Earth || BLACK | 10 || Green Orange || VVC Oil Temp Signal || BLACK
  11 KB (1,938 words) - 17:53, 19 September 2011
• S2 rear lights
  ...d together inside a ‘shrink-fit’ black sheath. Don’t confuse them with the black (positive) feed to one of the lights (which does not go into the shrink-fit
  4 KB (706 words) - 17:08, 17 February 2018
• Pricing and Upgrades (2011)
  | '''Black Style Pack'''<br />Black Wheels<br />Black Rear Diffuser || £520 || €715 || €715 || €710 || €720 || €725 || ...d Centre Console<br />Black Perforated Leather Handbrake-lever Gaiter<br />Black Carpet Mats with Embroidered Elise Logo<br />Noise Insulation Panelling<br
  9 KB (876 words) - 12:33, 3 August 2022
• S2 Wheel Options
  | notes = OEM S2 wheels, also available in black. Front in black: D117G0024H
  14 KB (1,847 words) - 18:10, 7 August 2017
• Wheels and tyres - Evora
  ...etal, Forged | 120px]] [[File:Evora Design Wheel - Gloss Black.jpg | Gloss Black, Forged | 120px]] | Diamond Cut - Forged <br /> Gunmetal - Forged <br /> Gloss Black - Forged <br /> Satin Gold - Forged || Front: 8.0J x 19"<br />Rear: 9.5J x
  13 KB (2,084 words) - 16:00, 8 October 2018
• Steering rack
  ...Sona rack has only casing around the the pinon, the rest is contained in a black tube.
  2 KB (399 words) - 11:17, 7 July 2008
• Steering Wheel - Evora
  ...ber A132V0378F) and Finisher Trim (Pre-MY12 - Part Number A132V0082F, MY12 Black Finisher - Part Number A132V0333F). IPS equipped cars are fitted with a dif
  2 KB (327 words) - 00:03, 6 November 2012
• Heater
  Image:heater1.JPG|Remove the [[Access panel|Access panels]] and black plastic covers.
  2 KB (277 words) - 13:11, 11 December 2009
• Hurricane HID kit FAQ
  ...o kit has a three spade connector. One is permanently connected to ground (black), the centre spade is permanently connected to + (red). The other spade is ...a diode which runs from the main beam spade to the centre spade (the round black part with two leads). The diode has one side with a printed ring. This shou
  11 KB (2,152 words) - 21:30, 5 December 2006
• Light Switches (Elise/Exige S1)
  The whole black front with icon can be swapped however there are two clip designs. ...flasher (some hazards are red, some black, I believe this number to be the black version based on a purchased brand new part)
  5 KB (796 words) - 14:46, 26 April 2022
• Aerodynamics - Exige V6
  ...hat of the Lotus OEM sport splitter. Both variants are finished in a satin black to match OEM and come with full fitting kit and instructions. It is importa ...ing is fixed to the tailgate by specially built Komo-Tec wing supports (in black). Fixings supplied as standard.
  6 KB (917 words) - 14:11, 25 May 2020
• Door Mirror, Sourcing and Replacing
  A 2nd hand or pattern part is likely to be unpainted (black) or in the wrong colour (Metro Beige on you Exige anyone !!!). Compared wit ...le cross head (phillips) self tapping screw. The screw is located behind a black sticker on the rear of the mount. Breakage of these dowels appear to be a c
  7 KB (1,220 words) - 00:49, 15 January 2012
• Remote Boot Release for S2
  Two wires run into the auxiliary power socket connector, a ground wire (black) and a 12v live wire (purple). You will need to splice another wire into bo ...nd black for ground. I got 6m of both (and used a lot more of the red than black). How much cable you will use will entirely depend on where you decide to m
  14 KB (2,690 words) - 21:17, 17 April 2011
• Sill Pad Retrim
  ...r cleaning up the insides of the plastic, nor removing all the supersticky black stuff that held the pad on. Life is too short. Draw around your plastic on
  3 KB (596 words) - 10:00, 13 October 2010
• Remove S2 centre console
  1.Remove the one screw holding the black phone/cup holder between the back of the seats. Remove the item. ...ant the centre console out). The 12v lighter socket unplugs by pulling the black plug connector and there is enough wire slack to do this easily. Now you ca
  4 KB (674 words) - 08:48, 3 January 2014
• Installing an oil pressure/temperature gauge in S2
  ...(again amazed of the amount of oil that is comes out, after 20 hours thick black tar seems to drip out) ...ond fitting is shown below. The gauges are held very firmly in place using black silicone sealant as a glue - it is just visible around the edges of the rig
  6 KB (1,086 words) - 15:09, 17 March 2012
• Contemporary Variants
  Elise Black Edition (R or SC)<br /> Bell & Colvill Exige V6 Cup Black Edition
  5 KB (791 words) - 17:32, 24 January 2022
• Stack
  The glass is held in place using a black bath sealant type substance and this should be scraped away as best as poss Once I was satisfied that I had removed as much of the black sealant as I could I gently started to insert broken stanley blade segments
  7 KB (1,263 words) - 15:30, 15 October 2019
• S2 Removable Steering Install
  10A. If you have a boss kit where the black negative contact is isolated you may need to make up a wire with a spade cr * Thin lipped black adaptor & 6 M6 screws
  4 KB (684 words) - 22:40, 13 March 2014
• Evora footwell and gearbox tunnel draught
  ...tie holding the wiring to the bulkhead. Move the relay box out of the way. Black letterbox opening behind is the culprit of the draughts.
  3 KB (444 words) - 17:37, 22 February 2013
• Evora model history milestones
  ''Body (S only):'' door mirror covers painted Phantom Black (Lotus code B123) as standard. Rear undertray: Additional integral undersid ...lity control (also refered to as Lotus DPM). Cross drilled brake discs and black painted callipers fitted to supercharged models as standard.<br />
  15 KB (2,201 words) - 14:01, 18 March 2019
• Bluetooth Handsfree Stereo in S1 Elise
  ...ay be worth noting which colour wires (some are the same colour but with a black line) go in which location.
  4 KB (730 words) - 01:21, 28 December 2010

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)