Search results

Jump to navigation Jump to search

Page title matches

  • =Lotus Driving Academy - Level 1= ...of June I was lucky enough to take part in the Lotus Driving Academy Level 1. The weather couldn‟t have been any more perfect, beautiful clear blue sk
    3 KB (555 words) - 19:58, 31 July 2011
  • Janspeed 4-2-1 Manifold S2 Day 1 - Tuesday (8:00pm start, not recommended)
    9 KB (1,596 words) - 22:21, 12 July 2017

Page text matches

  • {| class="wikitable sortable" border="1" | 1:18
    5 KB (746 words) - 09:13, 28 September 2012
  • P1400 Coolant fan relay 1 short P1401 Coolant fan relay 1 open
    3 KB (544 words) - 09:24, 17 July 2013
  • {| border=1 cellpadding=5 align=center ...) K100 JRSC CC Straight inliet HKS filter decat 3.2" Stock bottom pulley 4-1 manifold 2.5" exhaust JDM cams || TDI || Hubs || [http://www.dyno-plot.co.u
    1 KB (163 words) - 13:12, 6 November 2014
  • 1) Fit carpets, as seen in the Touring Pack. ...s are obtained by attaching small pieces to the middle of each panel (e.g. 1 patch under each seat).
    1,011 bytes (157 words) - 10:17, 8 November 2012
  • 1 is best / recommended but obviously some items are not easily available at '''1.''' Chemical Guys Maxi Suds 2
    3 KB (409 words) - 23:07, 4 November 2018
  • {| border="1" {| border="1"
    3 KB (389 words) - 15:34, 27 December 2011
  • {| border="1" {| border="1"
    5 KB (827 words) - 16:48, 15 October 2023
  • {| border="1" width="700" | 2009 || Evora || 2 || £34,950 || £34,950 || £34,950 || -1 || £1,955
    9 KB (1,118 words) - 16:17, 15 June 2013
  • {| border="1" {| border="1"
    2 KB (199 words) - 13:57, 28 January 2018
  • =Lotus Driving Academy - Level 1= ...of June I was lucky enough to take part in the Lotus Driving Academy Level 1. The weather couldn‟t have been any more perfect, beautiful clear blue sk
    3 KB (555 words) - 19:58, 31 July 2011
  • {| border="1"
    702 bytes (117 words) - 15:10, 28 February 2013
  • ==Lotus Sport Stage 1 Exhaust== ...n in the car.<br />Customer can choose 2 Levels of exhaust tone<br />Level 1 - Stock sound level<br />Level 2 - Sport sound level<br />Level 3 - Loud F1
    5 KB (618 words) - 21:36, 4 June 2013
  • Lifestyle paint colours are priced at £1,100<br /> {| border="1" width="700"
    3 KB (422 words) - 15:09, 10 January 2019
  • Remove the 3 screws holding the radio in, there are 2 on the driver side, 1 on the airbag side. ...h that will now be exposed. 1 at each end under where the side vents were, 1 right in the middle where the vents were and one hidden behind the speedo u
    3 KB (607 words) - 00:02, 24 April 2012
  • == 1) Short description of the long roof top == === 1.1) Similarities ===
    5 KB (850 words) - 12:44, 3 June 2013
  • ...(baring some converted Esprit and rumoured factory prototypes<sup>[[#ref1|1]]</sup>) <div id="ref1"><sup>1</sup> [http://www.lotusespritworld.com/EOtherstuff/Convertible.html Lotus E
    3 KB (474 words) - 17:19, 13 November 2012
  • 1. remove top screw. {{clr}}
    538 bytes (79 words) - 19:12, 23 March 2014
  • ...ral: [http://vsi.lotuscars.com/ Lotus Vehicle Service Information] £13 for 1 hour access with unlimited downloads. | PDF: [http://vsi.lotuscars.com/ Lotus Vehicle Service Information] £13 for 1 hour access with unlimited downloads.
    12 KB (1,839 words) - 04:58, 25 February 2018
  • - Union 1: BN3 10mm x 1mm standard male - Union 1: BN3 10mm x 1mm standard male
    2 KB (329 words) - 21:07, 20 February 2019
  • 1/ Disconnect the Lamp
    1 KB (194 words) - 13:35, 19 January 2012
  • {| border="1" {| border="1"
    4 KB (368 words) - 12:33, 3 August 2022
  • ...ch turn is around 1.7mm and you need to use a magnifiction ratio of around 1.6 due to tyre and damper angle so each turn of the upper spring seat should {| border="1"
    3 KB (353 words) - 11:05, 28 July 2016
  • {| border="1" {| border="1"
    9 KB (876 words) - 12:33, 3 August 2022
  • | 1-way (Combined bump and rebound) | £1,410
    9 KB (1,413 words) - 00:27, 23 December 2017
  • 1. Using a 2.5mm allen key, remove the grub screw on the front side (the side 1. Cut a piece of wet and dry 600 3 inches width of the sheet.
    2 KB (344 words) - 12:25, 21 October 2016
  • The Rover S2 uses 3 identical bearing packs without built-in sensor and 1 pack with a sensor for the ECU (which then relays it to the speedo) on one
    1 KB (199 words) - 20:18, 9 June 2011
  • ...owered S2 (111R, Fed-Elise, Exige2) also connects the CAN bus (running at 1 megabit/s) to the dash unit and does away with most of the discrete inputs 1 = Enhanced (manufacturer specific)
    4 KB (667 words) - 10:45, 5 January 2018
  • {| border=1 cellpadding=5 cellspacing=2 ...tandard manifold 3.3kg flexi pipe 3.4kg || k series full stainless steel 4-1 manifold 8kg
    7 KB (1,029 words) - 23:05, 30 August 2019
  • ==== Child Seats Group 1 (9 months - 4 years) ==== *Britax Evolva123 (Groups 1,2&3)- suitable for the rear seats in the Evora (Base too wide for standard
    4 KB (673 words) - 21:44, 14 August 2022
  • {| border="1"
    1 KB (249 words) - 12:43, 25 July 2011
  • {| border="1" | 1 - 100
    5 KB (784 words) - 15:06, 7 January 2022
  • {| border="1" {| border="1"
    4 KB (659 words) - 15:56, 21 July 2022
  • {| border="1" {| border="1"
    12 KB (1,606 words) - 15:06, 23 April 2019
  • {| border=1 cellpadding=5 cellspacing=0 ! Gearbox Code !! 1 !! 2 !! 3 !! 4 !! 5 !! Final Drive !! Used In
    4 KB (491 words) - 10:24, 22 November 2021
  • 1 x Catalyst hanger bracket (Lotus part A111G6001F) ( 3 rubber mounts are used, 2 on the 'back box' and 1 one the CAT).
    5 KB (827 words) - 15:54, 22 November 2019
  • {| cellpadding="8" cellspacing="0" border="1"
    2 KB (293 words) - 15:38, 10 March 2013
  • ..., as fitted to the Toyota Auris 2.0 D-4D and 2.2 D-CAT models.<sup>[[#ref1|1]]</sup> These are diesel engines, and the standard ratios are as they in th {| border=1 cellpadding=5 cellspacing=0
    7 KB (1,123 words) - 21:54, 8 July 2021
  • {| border="1" | Unit 1,Naylor Court,Blaydon,Tyne & Wear, [http://maps.google.co.uk/?hl=en&q=NE21+5
    9 KB (1,428 words) - 12:33, 11 January 2024
  • {| border="1"
    1 KB (199 words) - 17:19, 10 February 2019
  • 1. Wetness of door sill trim 4. 1 per door
    5 KB (834 words) - 11:44, 20 February 2016
  • '''Stage 1 (Removing old paint)'''
    2 KB (386 words) - 14:16, 19 January 2012
  • {{Infobox Timetools | time=1 hour | tools=[[Ball joint splitter]], spanner, jack}} '''1. Raise car and remove front wheels'''
    5 KB (916 words) - 12:34, 30 May 2013
  • - Union 1: BN3 10mm x 1mm standard male
    1 KB (197 words) - 19:43, 4 July 2014
  • {| border="1" | [http://news.seloc.org/1/ October 2004] || 10/2004 || '''Welcome''' - Welcome to the first monthly
    14 KB (2,178 words) - 22:35, 27 August 2011
  • '''Step 1''' - '''DISCONNECT BATTERY FIRST !!!!!'''
    2 KB (327 words) - 00:03, 6 November 2012
  • {| border=1 cellpadding=5 cellspacing=0 | Elise S1 (120bhp) || MEMS 1.9 || proprietary || LotusScan (Connector SAE J1962)<br />or Rover Test-Book
    6 KB (945 words) - 15:04, 13 January 2020
  • 1. An early S2 with H1/H7 headlamp cluster (inside wheel arch liner AND front
    1 KB (195 words) - 22:17, 23 May 2014
  • {|border=1 {|border=1
    7 KB (1,029 words) - 23:11, 5 February 2017
  • Bulbs as fitted as standard to Series 1 Elises/Exiges. <table cellspacing="0" cellpadding="3" border="1">
    5 KB (894 words) - 22:16, 17 February 2023
  • ...you have measured the shaft end play without shim pack. In my case it was 1,68 mm. ...her should be allowed to take up. In my case it summed up to 0,83 + 0,17 = 1,00 mm.
    8 KB (1,467 words) - 20:21, 25 April 2014
  • ...f the injectors. Tell tale signs can include rusty spark plugs on cylinder 1 and 4, sometimes even all four, lumpy idle or misfiring, high emissions, je
    2 KB (230 words) - 19:10, 5 September 2011
  • '''1. [[Remove the headlamp cover]]''' Next up, poke through the rubber grommet from inside (1) and trim the inner edge a little (2) to free things up a little for when i
    6 KB (944 words) - 19:38, 13 February 2015
  • The toe-in of each straight edge can therefore be calculated to: 30/3998=1/133 mm ⁄ mm ...ans that for every mm you go forward along the straight it goes inwards by 1/133 mm.
    5 KB (924 words) - 21:26, 19 April 2020
  • 1. Check that the right-hand most "switch" in your light panel is a dummy. I ...ch was. It will work best if you offset the template to the right by about 1-2mm. Don't go too far though otherwise the switch surround won't go back o
    4 KB (654 words) - 14:03, 18 June 2014
  • 1. Homebase for two bits of 2400mm rigid aluminum (16mm ally channel as they 1. To measure camber I made a plumb line out of stuff lying around (net curta
    6 KB (1,004 words) - 01:13, 6 March 2017
  • [[Image:CDLModuleReplace3.jpg|left|thumb|Move vent hose 1]] [[Image:CDLModuleReplace5.jpg|left|thumb|Module 1]]
    4 KB (742 words) - 13:34, 19 January 2012
  • {| cellpadding="8" cellspacing="0" border="1" |1
    16 KB (2,482 words) - 13:02, 5 February 2023
  • {| border=1 cellpadding=5 align=center ...2 || 130/130mm || +3.8° || -0.1° || 0.2mm OUT Overall [-0.03°] || -1.8° || 1.2mm IN each side [0.16°]
    7 KB (957 words) - 14:44, 4 August 2023
  • {| border="1" {| border="1"
    8 KB (1,241 words) - 16:23, 23 August 2021
  • ...his installation at http://forums.seloc.org/viewthread.php?tid=171330&page=1#pid3347959 1. Mute selecter: Set key hold after power on
    6 KB (1,086 words) - 15:09, 17 March 2012
  • Twin coolers are only fitted as part of the supercharger pack else 1 cooler. - Ads_green Lotus stage 1 exhaust as std, the later cars had a much larger and heavier back box. - Th
    6 KB (1,112 words) - 15:34, 12 December 2011
  • | 1 | 1
    16 KB (2,081 words) - 16:04, 9 August 2022
  • A bit noisy if used with a cat pipe and Janspeed 4-2-1 manifold. It has a nasty resonance at 3,300rpm - and that is 80 mph in an S ====4 into 1====
    12 KB (1,543 words) - 09:27, 11 October 2018
  • * MANN W 67/1
    1 KB (232 words) - 08:50, 24 August 2018
  • *S2 = 1mm (1.00mm) gap The electrode is extremely thin (only approx 1 to 2mm) and can damage easily.
    2 KB (274 words) - 21:31, 5 February 2019
  • ...mber that you need to order is 10501, delivery should be expected in about 1 week. You may also be able to get it from a UK Jeep dealer - please add you [[image:fuel cap 1.jpg|thumb|left]]
    6 KB (1,092 words) - 13:32, 14 August 2015
  • {| cellpadding="8" cellspacing="0" border="1"
    2 KB (338 words) - 22:30, 19 January 2015
  • ===Team Dynamics Pro Race 1.2S=== | price = Retail inc VAT £1,682.60
    14 KB (1,847 words) - 18:10, 7 August 2017
  • ...sm, I got one from Eliseparts.com. You'll also need small Allen keys, 10mm 1/4inch socket, 10mm spanner, medium size posidrive/cross head screwdriver. 1. Remove the door card, this should just be a few Allen heads, velcro, one p
    5 KB (803 words) - 14:11, 3 June 2023
  • [[image:Evora footwell and gearbox tunnel draught - 1.jpg|right|thumb|100px]] '''1.''' Remove the fusebox panel in the passenger footwell and locate the relay
    3 KB (444 words) - 17:37, 22 February 2013
  • [[Image:M111 - Footwell Treatment - Step 1.jpg|thumb|center|400px]] Secondary Floor Panel Set A117A0235S, 1<br />
    11 KB (2,029 words) - 13:21, 10 January 2018
  • [[image:Nitron-Factory-Tour-1.jpg|center|thumb|400px|Nitron Factory Workshop]]
    3 KB (472 words) - 19:04, 31 July 2011
  • {| border="1" width="600" | align="center" | 1
    21 KB (2,747 words) - 18:34, 30 November 2018
  • # Raise rear of car.<sup>1</sup> <sup>1</sup>Access to the underside of the vehicle will be greatly improved if it
    5 KB (906 words) - 17:29, 19 June 2019
  • ...standing start and a flying finish. The timing for most events will be to 1/100th of a second and is always activated by a timing strut on the front of ...split further depending on engine capacity with force induction carrying a 1.4 multiplication factor on your engine capacity. In general modifications a
    3 KB (597 words) - 00:35, 24 December 2012
  • ...ystem for the Elise, Exige and 2-Eleven featuring any of the Toyota 1.8 or 1.6 ltr Engines. This system has twin tailpipes that are positioned either si ...exhaust system for the Elise and Exige featuring any of the Toyota 1.8 or 1.6 ltr Engines. This system has twin tailpipes that exit through the rear di
    13 KB (1,808 words) - 14:15, 11 July 2018
  • ...nd the new Europa all share the same door mirror and plastic shroud (Parts 1, 3 & 4 in the diagram below). The same parts are used on the MGF/MGTF and a Parts 1, 3 and 4 are not "handed" so any mirror sourced will fit any side of the ca
    7 KB (1,220 words) - 00:49, 15 January 2012
  • {| border=1 cellpadding=5 cellspacing=0 | S3 S (220) || 1.8 Toyota 2ZR|| Standard || 92-93
    2 KB (279 words) - 20:57, 2 May 2018
  • 1) Remove battery & wait 10 seconds before re-installing (re-sync can fail if cockpit intrusion sensing and a self powered siren, which meets Thatcham 1
    12 KB (2,008 words) - 17:54, 1 March 2015
  • 1. Remove fascia around stereo - held by 4 tower clips - I opened the face of
    2 KB (389 words) - 12:43, 10 September 2012
  • ...f the injectors. Tell tale signs can include rusty spark plugs on cylinder 1 and 4, sometimes even all four, lumpy idle or misfiring, high emissions, je
    2 KB (332 words) - 12:05, 20 April 2015
  • 1)Firstly,remove the drivers seat by unbolting the rear two 6mm allen bolts a 5)Re-fit the seat by reversing step 1.Dont forget the metal tabs at the ends of the seat runners.Check all fixing
    5 KB (949 words) - 09:36, 10 August 2019
  • 1. Pronounce other SELOC members as dead, even if they look it.
    3 KB (581 words) - 10:22, 31 August 2011
  • ...battery, no passenger seat, no roof or rear window, lightened door beams, 1/2 size alloy fuel tank Heavy A-frame cage. Weighed at Snetterton after Lotr |Apr 09, French public weigh bridge, 1 gallon fuel, minus carpets, rear screen & hoop
    13 KB (1,957 words) - 22:09, 29 December 2022
  • '''1. Remove obstructions above heater unit''' ...lly, consider drilling 2 x 6mm holes in the bottom of the tub (1 at front, 1 at back, 6cm from either edge) beneath the blower to provide some drainage
    8 KB (1,360 words) - 11:53, 9 January 2020
  • ...rance races for amateurs and professional drivers. Race lengths vary from 1 to 24 hours. ==Elise Trophy Season 1==
    10 KB (1,570 words) - 12:09, 11 August 2012
  • '''1. [[Remove the front clamshell|Remove S2 front clamshell]]''' 1. The crash structure is different to the one above, and you don't need to p
    6 KB (1,048 words) - 21:33, 22 April 2020
  • Fixing #1 is simple, although you might need to modify an allen key to do it (see poi
    4 KB (648 words) - 14:19, 5 November 2011
  • G-Loc GPX4-GS-1 (Evora 400 G-Loc GPX3-GS-1 (Evora 400
    8 KB (1,111 words) - 08:22, 29 September 2023
  • {| border=1 cellpadding=2 cellspacing=0
    2 KB (322 words) - 18:43, 20 June 2021
  • Suspension Enhancement Kit A111C0148S 1 Fitting Instructions LSL459 1
    6 KB (1,002 words) - 13:55, 16 March 2018
  • ...mainstream Lotus unit featuring a 40mm piston hence the name. Available in 1 way, 2 way and 3 way versions with helpful factory-configured "Fast Road", ...cture to the NTR40 but featuring a larger piston (now 46mm). Also comes in 1/2/3 way versions with "Track Day" and "Race" spring/piston specs. Note ther
    7 KB (1,179 words) - 09:28, 23 August 2015
  • |time = 1 hour to remove rack 198-3136 1 £2.82 £2.82 Spheerol MP2 bearing grease,400gm
    8 KB (1,549 words) - 09:29, 19 September 2020
  • {| border="1"
    3 KB (354 words) - 17:54, 19 July 2019
  • 1) take the winder off
    2 KB (419 words) - 19:09, 22 August 2021
  • *Black - Terminal 1 - sensor signal (+<sub>ve</sub>) *Attach an electronic voltmeter or oscilloscope (adjusted to a 1.0 volt range) across the black and grey wires attached to the lambda sensor
    5 KB (860 words) - 06:56, 1 September 2022
  • 1.Heat - still ineffective 1. SAF111 - 1 litre
    9 KB (1,676 words) - 08:48, 21 September 2021
  • 1. 52mm TB as standard (EU2 48mm) | P1400 || S2 Fan 1 Relay Short ||
    11 KB (1,938 words) - 17:53, 19 September 2011
  • {| class="wikitable sortable" border="1" | [http://maps.google.co.uk/maps?q=CM24+8GF Units 1-3, M11 Business Link, Parsonage Farm Forest Hall Road, Stansted, CM24 8GF]
    13 KB (1,569 words) - 12:33, 20 August 2018
  • '''1) Rain-X.''' A liquid windscreen coating that costs about £5 from halfords. ...alfords.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&langId=-1&catalogId=10151&productId=222433&categoryId=31293
    5 KB (961 words) - 20:05, 28 April 2015
  • {| border="1" ...nce]||0800 276 1338|| ||Audi/ Honda/ Duratec/ Rover/ Toyota||6 Track days, 1 Answer insurance. Contact the team on 0800 276 1338 for a bespoke quote, wh
    13 KB (1,925 words) - 18:10, 9 January 2023
  • "when we exchanged the 48m TB for 52 Item we got a stunning 1 bhp max power increase, we got a 3 Ft Lbs max increase in Torque"
    2 KB (421 words) - 11:41, 10 October 2019
  • {| border="1" width="100%" | valign="top" colspan="2" | 10:1
    28 KB (3,682 words) - 21:52, 7 October 2011
  • [[image:Evora-Bumper-Removal-1.jpg|400px]] An alternative is a tiny 1/4 ratchet with a shallow socket.
    6 KB (979 words) - 20:15, 6 February 2020
  • #Pour a quarter-cup of baking soda into a small bowl and add 1 to 2 tablespoons of water until the mixture forms a thick paste. File:Disassembly1.jpg|disassembly 1
    5 KB (928 words) - 12:51, 31 January 2018
  • ...ident of which is here: http://arc.seloc.org/viewthread.php?tid=99980&page=1. ...asily customised to suit different sized low and mid-volume vehicles up to 1,900kg by altering the length and thickness of various extrusions.
    3 KB (418 words) - 21:53, 8 July 2021
  • Janspeed 4-2-1 Manifold S2 Day 1 - Tuesday (8:00pm start, not recommended)
    9 KB (1,596 words) - 22:21, 12 July 2017
  • Bearing Failure for S2 111s and other model with 4-2-1 exhaust: Due to the additional width of the 4-2-1 pipes, failure of the rear bearing is not uncommon.
    11 KB (1,968 words) - 11:05, 3 July 2023
  • | dB = 84dB @4000rpm / 1 meter 1: Not as loud as the Supersport or Motorsport
    14 KB (1,892 words) - 14:15, 11 July 2018
  • {{Infobox Timetools | time=Approx 1 hour - Assuming everything comes apart nicely and the outside bearing racer '''1.''' Whilst the car is sitting on the ground, pop the wheel cap off and usin
    9 KB (1,548 words) - 17:51, 17 October 2022
  • So, the plan is this: Nearly as soon as you can run closed-loop (lambda=1) you start purging as much as the engine/control capability will allow. Onc
    3 KB (470 words) - 17:56, 5 April 2023
  • # Remove the column shroud (7 screws and 1 nut for the trip switch)
    3 KB (539 words) - 08:34, 7 April 2024
  • ...fabric scissors, Tape measure, Pencil, Baby Wipes, Hoover, Eye Protection, 1 set of new Grommets}} Harness Grommets can be fitted to the standard S1 and [[Image:Fitting Harness Grommets - Image 1.jpg|thumb|center|400px]]
    5 KB (855 words) - 00:51, 16 March 2012
  • # Remove upper outer timing belt cover; it is held in with 5 M6 bolts, + 1 hidden behind the oil dipstick tube ...orque as per manual to 10NM. As you tighten down the cam carrier the last 1-2mm onto the head, check again that the seals are square in their bores.
    6 KB (1,057 words) - 22:53, 20 February 2018
  • In a 1ZR-engined car (Elise 1.6, 2011 on), it delivers approx 195bhp and 159lb/ft. VF Stage 1 – 280bhp and 176lb/ft
    3 KB (420 words) - 19:43, 25 February 2018
  • 1. The seals are a press fit into a recess on the head and can be replaced w
    3 KB (534 words) - 13:42, 13 March 2016
  • {| border=1 cellspacing=2 cellpadding=5
    3 KB (521 words) - 15:15, 12 November 2019
  • {| border="1"
    7 KB (1,017 words) - 16:59, 15 August 2013
  • ...ed on timescales of [http://forums.seloc.org/viewthread.php?tid=67321&page=1#pid2024244 under half an hour]! '''1. Remove both [[Access panel|front body access panels]]'''
    8 KB (1,376 words) - 00:20, 10 July 2019
  • 1. Give me a little Brake ...nce, 1992 front wheel drive Dodge Monaco, a Lotus Elise, and a non-ABS Gen 1/2 Dodge Viper have in common? Would you believe the rear brakes?
    7 KB (1,178 words) - 19:17, 13 October 2023
  • Step 1
    3 KB (617 words) - 16:11, 14 May 2022
  • Servicing on the Evora and Evora S is carried out on a 1 year or 9,000 mile basis. {| border="1"
    12 KB (1,957 words) - 11:45, 27 August 2014
  • {| border="1" {| border="1"
    37 KB (5,161 words) - 16:18, 12 August 2021
  • =Driven: Lotus Elise 1.6= ...ad down to Bell and Colvill just outside of Guildford, pick up their Elise 1.6 demonstrator, spend a few hours driving, get a feel for the car and then
    5 KB (919 words) - 22:40, 28 July 2011
  • . 1/2" breaker bar to loosen the crank bolt. As long as possible (don't try and 1. Run the rear of the car up on ramps if you have them and remove the rear u
    15 KB (2,706 words) - 20:36, 21 August 2023
  • Step 1
    3 KB (600 words) - 16:25, 26 May 2020
  • ===1. [[Remove S2 front clamshell|Remove the front clam]]===
    3 KB (578 words) - 10:23, 15 June 2016
  • ...340R, were fitted with the same cross drilled disks as seen on the Series 1 111s and Sport 160 editions described above. * use a slightly different offset (about 1 to 2mm) because the VX220 uses a different bearing pack. (uprights are iden
    14 KB (2,435 words) - 16:46, 7 May 2022
  • 1. Screw out the new toe link ends, microwave rubber covers for 60 seconds, f
    3 KB (555 words) - 05:13, 10 October 2021
  • | Front: 9.5 kg<br />Rear: 11.1 kg <br/> Set: Set 41,2 kg ! Option 1
    13 KB (2,084 words) - 16:00, 8 October 2018
  • ...taxi service for 1-4 passengers 1hr radius of Leeds (Golf if wet/more than 1 pax)
    8 KB (1,336 words) - 21:27, 5 April 2021
  • [[image:Bocardo 1.jpg|center|thumb|400px|Xavier Brooke at the Bocardo Autosolo]] ...ted badly. The cones were all numbered and Course 2 was essentially Course 1 but run in reverse. Part way through the course I panicked and came to a ha
    6 KB (1,092 words) - 19:49, 31 July 2011
  • [[image:Evora-DIY-Sill-Wrapping-1.jpg|400px]]
    4 KB (705 words) - 19:44, 7 May 2021
  • 1. Straighten steering wheel and try and chock the front wheels to avoid move
    4 KB (684 words) - 22:40, 13 March 2014
  • * LIEBHERR 1 001 443 3
    4 KB (630 words) - 09:46, 27 May 2019
  • [[Remove the front undertray|1. Remove the front undertray.]] ...n the right will allow the bush to be pressed out of the wishbone by about 1 inch.
    20 KB (3,478 words) - 10:50, 30 April 2012
  • Price Inc VAT '''£1,559''' ...which is a significant number considering that the car itself weighs about 1,050 kgs. The ALIAS23 tailgate-mounted wing is inspired by the Exige Cup 380
    6 KB (917 words) - 14:11, 25 May 2020
  • ...rld. The car was never officially exported to the USA, although reports of 1 car built to USA specification have been seen.
    4 KB (598 words) - 21:55, 29 January 2016
  • ...e bore with some curved tools (eg. bend a screwdriver ) so it comes out as 1 piece. (Courtesy of Arno) Hint 1: A G-clamp may not provide sufficient force to engage the snap ring. It ma
    11 KB (2,024 words) - 13:10, 11 February 2020
  • 1. Jack up the car and remove the rear wheel. Use axle stands.
    5 KB (861 words) - 21:23, 18 January 2019
  • 1 off Trunnion A111J0155F
    5 KB (929 words) - 07:20, 10 May 2015
  • There are '''two''' vent holes on either side of the battery, about 1/4 inch in diameter. I used the passenger side one for the vent pipe, and pl 1. Undo the retaining clamp at the base of the battery (6mm Allen key requir
    10 KB (1,655 words) - 16:03, 9 October 2018
  • ...formation can be found on the Wikipedia Toyota ZZ engine page.<sup>[[#ref1|1]]</sup> ...Elise 1.6 Engine.jpg|thumb|center|400px|The 1ZR-FAE as fitted to the Elise 1.6 - (c) Lotus Cars ]]
    13 KB (2,058 words) - 21:58, 8 July 2021
  • ...ssion to produce a charge cooled, supercharged, turbocharged, 1000 bhp and 1,000,000 torques Death Car.
    5 KB (885 words) - 17:41, 13 December 2015
  • These notes are intended to help with installation of a head unit in a series 1 elise. This information was learned whilst replacing a dated Kenwood CD pla
    5 KB (970 words) - 19:25, 26 December 2015
  • ...the Australian V8 Holden touring cars! So it has enough capacity for your 1.8 K series! The filter is attached to the throttle body with a silicon hose | notes=Carbonaire cold air induction kit for Mk1 or 2 K series engine, 1.8 or VVC this kit features a silicon connection hose from filter cannister
    18 KB (2,993 words) - 15:25, 16 June 2023
  • ...uild plate and will sequentially celebrate a specific Grand Prix from car #1 commemorating Lotus’ first GP victory at Monaco in 1960 to car #81 markin Exige LF1 owners receive the Formula 1® package within the purchase price of the car which comprises a factory to
    23 KB (3,554 words) - 14:05, 18 March 2019
  • ...l ended allen keys (to remove the handbrake assembly if you need to) and a 1/4 inch socket set to get at the bolts under the gear leaver. File:Throttle Cable New Route 1.jpg|New cable route, looking up past alternator belt
    7 KB (1,299 words) - 23:05, 4 November 2019
  • 1) Send and email to service@adac.de asking to become a member. Here's the t <address 1>
    6 KB (959 words) - 09:25, 7 June 2016
  • Bleed nipples Elise (Brembo) M10 X 1.0 X 30mm * [http://www.motiveproducts.com/ Motive Products - #1 Selling DIY Brake Bleeder]
    7 KB (1,292 words) - 13:27, 11 June 2022
  • 1. The thermostat temperature digits are visible through the top hose connect ...fitting, go there: http://forums.seloc.org/viewthread.php?tid=104578&page=1
    8 KB (1,252 words) - 13:49, 27 April 2018
  • {| border="1" class="wikitable" ...rovenance-with-limited-edition-exige-lf1/ SELOC - Lotus celebrates Formula 1 provenance with limited edition ‘Exige LF1’]</ref>, the Exige LF1 is a
    26 KB (3,951 words) - 17:23, 8 November 2018
  • ...elinkage1a.jpg|thumb|150px|Step1: Removing the baseplate screws|left]]Step 1 Some of you may stumble here because the two screws holding the base plate ...ove the smoothness of the throttle movement in these cases. DeRoure says £1.03 factory order. Without a good button, there is extra strain on the pivo
    8 KB (1,434 words) - 18:01, 19 March 2020
  • ...nwood KSC-SW01, but choose a KSC-SW11 for this installation for 3 reasons. 1. the KSC-SW01 has a more limited remote control. This is not a problem if y
    7 KB (1,337 words) - 14:23, 19 September 2016
  • | image2 = [[Image:1012-011-Braid-FR-S1-Felgensatz-Elise-Mk1-1.jpg|thumb|Fullrace A Wheel]]
    11 KB (1,467 words) - 16:04, 22 June 2023
  • '''1. Remove roll over bar shroud (Longtail S2)'''
    9 KB (1,554 words) - 22:39, 15 December 2019
  • [[image:Elise-Side-Window-1-1024.jpg]]
    10 KB (1,825 words) - 16:11, 16 August 2020
  • [[Image:Lotus-Evora-1.jpg|center|thumb|400px|The Lotus Evora at the 2008 British International Mo {| border="1"
    50 KB (7,888 words) - 17:37, 12 September 2023
  • ...nsors for the ABS, while older cars without ABS use 3 'plain' bearings and 1 with a speed pulse sensor.
    10 KB (1,820 words) - 19:01, 23 March 2014
  • ...https://www.bremboparts.com/europe/en/catalogue/lotus-elise-1-8/000016847-1<br> ...p.com/advanced_search_result.html?keyword=CL+Brakes+&search_in_description=1 Elise-shop.com are official CL Brakes distributor for Lotus applications]
    55 KB (8,842 words) - 20:48, 17 April 2022
  • Kit Price: '''£1,295''' Kit Price: '''£1,295'''
    13 KB (2,085 words) - 19:44, 20 January 2013
  • 1. Ensure you have the minimum amount of petrol as possible in the tank befo
    12 KB (2,060 words) - 23:45, 23 February 2019
  • =Series 1= Starter motor uprated from 1.0 kW to 1.4 kW and engine management fuse relocated from rear to front services
    37 KB (5,408 words) - 04:47, 25 February 2018
  • 1. Remove the front clam https://wiki.seloc.org/a/Remove_S2_front_clamshell
    16 KB (3,021 words) - 15:22, 11 February 2020
  • 1. Terminally tight as a gnat’s chuff, or 1.Support for the right-hand face of the pedal is wholly dependent on the fit
    27 KB (4,929 words) - 00:36, 22 November 2023